87940-0R120 Left Exterior Side Mirror Assembly for TOYOTA RAV4 2014
Primary OE reference: 87940-0R120
Cross-reference 1: 87940-0R120
Product type: Exterior Side Mirror Assembly
Applicable vehicle: TOYOTA RAV4 2014
Installation position: Left exterior mirror position
Brand: TOYOTA
Model: RAV4
Vehicle year: 2014
Listed mirror features: 5-wire application reference
Mirror function: Replaces the outside viewing surface and housing within the application-specific door geometry while keeping the OE purchase reference traceable.
Mounting comparison: Review the signal-lamp opening using clear rear and connector photographs to separate facelift variations.
Electrical review: Separate the harness exit direction before optional functions are promised so unsupported functions are not claimed.
Fitment confirmation: Confirm TOYOTA RAV4 2014 and the left side before checking the base outline and connector.
Supplied component scope: For mixed orders, keep left and right assemblies on separate purchase lines with their own OE references.
Receiving priority: Compare the triangular mounting base before the packaging is discarded so left and right mirrors remain separated.
Handling note: Support the mirror adjustment plate under neutral receiving light before a distorted base is fitted.
Wholesale enquiry: Attach a connector photo if powered functions or lamp equipment must match the vehicle harness.
Order preparation: Submit the vehicle model and year with the export quotation request before a commercial invoice is prepared.
Internal item code: TY02014-007
87940-0R120 Exterior Side Mirror Assembly Product Overview
87940-0R120 identifies an exterior side mirror assembly for the left exterior mirror position on TOYOTA RAV4 2014. Maintains the door-mounted mirror position at the recorded door or auxiliary mounting point while keeping the OE purchase reference traceable. The page records TY02014-007 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Reconstructs the mirror base and visible rearward field after the removed part has been identified while keeping the OE purchase reference traceable. Replaces the vehicle’s original rearward observation area during a side-mirror replacement project so workshop planning starts with the correct part. Preserves the exterior mirror mounting envelope with the left or right position clearly separated before trim and wiring are reassembled. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Compare the door-side bolt pattern using the VIN when year boundaries overlap to distinguish manual and powered applications. Compare the left-right orientation against the removed mirror to avoid a trim-level mismatch. Compare the wiring lead and plug position from the inner mounting face to avoid a trim-level mismatch. Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Electrical and Housing Checks
Review the adjustment control type with the ignition and battery procedure observed before the workshop schedules installation. Compare the folding mechanism with the ignition and battery procedure observed so the supplied scope matches the enquiry. Protect the reusable electrical hardware before energising a replacement assembly so the supplied scope matches the enquiry. The listed feature reference is 5-wire application reference; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87940-0R120 |
| Cross-reference numbers | 87940-0R120 |
| Internal item code | TY02014-007 |
| Vehicle brand | TOYOTA |
| Vehicle model | RAV4 |
| Model year | 2014 |
| Installation position | Left exterior mirror position |
| Listed mirror features | 5-wire application reference |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Inspect the mirror adjustment plate on a clean padded surface so connector damage is isolated early. Review the mirror glass under neutral receiving light before the part is accepted into inventory. Isolate the painted or unpainted cover against the approved reference before the repair schedule is affected. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Specify the connector-side photograph with the export quotation request to make repeat ordering more reliable. List the destination country for every purchase line before a commercial invoice is prepared. Submit the complete OE reference together with consignee details before electrical variants are quoted. Identify body-colour finishing needs separately from the mechanical and electrical mirror specification.
Frequently Asked Questions
What should be checked when 87940-0R120 arrives?
Inspect the purchase-line label under neutral receiving light so cracked glass is found immediately. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 87940-0R120?
Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist. Connector and rear-mount photographs help separate close variants.
What is supplied with 87940-0R120?
Ask for written confirmation if the application requires a signal lamp, heating, power fold or a specific pin count. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 87940-0R120 listed for?
The recorded application is TOYOTA RAV4 2014. Production date, trim equipment and connector details still require physical verification.
Can 87940-0R120 fit every RAV4 model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
