87940-0R060 Left Exterior Side Mirror Assembly for TOYOTA RAV4 2012
Primary OE reference: 87940-0R060
Cross-reference 1: 87940-0R060
Product type: Exterior Side Mirror Assembly
Applicable vehicle: TOYOTA RAV4 2012
Installation position: Left exterior mirror position
Brand: TOYOTA
Model: RAV4
Vehicle year: 2012
Listed mirror features: 7-wire application reference
Mirror function: Maintains the intended viewing angle beside the cabin after the removed part has been identified before paint or finishing work is scheduled.
Mounting comparison: Compare the triangular mounting base with the vehicle year identified before the door trim is disturbed.
Electrical review: Inspect the available pin positions with each purchase line kept separate before final fitment approval.
Fitment confirmation: Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Supplied component scope: Only the identified product line is supplied unless additional mirror caps or hardware are agreed separately.
Receiving priority: Isolate the triangular mounting base under neutral receiving light so every received unit can be accounted for.
Handling note: Inspect the carton-supported corners during sample approval to prevent scratches during handling.
Wholesale enquiry: Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist.
Order preparation: Record the requested packaging mark with the target delivery timing to make repeat ordering more reliable.
Internal item code: TY02014-011
87940-0R060 Exterior Side Mirror Assembly Product Overview
87940-0R060 identifies an exterior side mirror assembly for the left exterior mirror position on TOYOTA RAV4 2012. Restores the vehicle’s original rearward observation area after the removed part has been identified while keeping the OE purchase reference traceable. The page records TY02014-011 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Restores the outside viewing surface and housing without treating a similar housing as universal while maintaining the intended exterior appearance. Preserves the passenger-side exterior sightline at the recorded door or auxiliary mounting point while maintaining the intended exterior appearance. Renews the driver-side rearward viewing point at the recorded door or auxiliary mounting point while keeping the OE purchase reference traceable. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Match the left-right orientation before body-color work begins so electrical functions remain compatible. Measure the folding joint and base angle before body-color work begins to avoid a trim-level mismatch. Cross-check the door-side bolt pattern at the exact door position to separate facelift variations. Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins.
Electrical and Housing Checks
Trace the turn-signal wiring with each purchase line kept separate to identify missing or damaged wiring early. Compare the plug keying and latch with the ignition and battery procedure observed so unsupported functions are not claimed. Identify the mirror-heating circuit before the inner door panel is refitted so lamp and adjustment requirements are clear. The listed feature reference is 7-wire application reference; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87940-0R060 |
| Cross-reference numbers | 87940-0R060 |
| Internal item code | TY02014-011 |
| Vehicle brand | TOYOTA |
| Vehicle model | RAV4 |
| Model year | 2012 |
| Installation position | Left exterior mirror position |
| Listed mirror features | 7-wire application reference |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Inspect the folding pivot before the component enters workshop stock to keep the correct SKU traceable. Document the connector terminals before electrical testing begins to keep the correct SKU traceable. Protect the connector terminals without placing weight on the glass to protect the visible exterior surface. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Provide the connector-side photograph when left and right units are combined to make repeat ordering more reliable. Provide the requested quantity with the export quotation request so similar mirror housings remain separated. State the original-mirror photograph when mixed-model stock is required to support accurate packing. Include TY02014-011 on repeat orders so the requested application remains traceable.
Frequently Asked Questions
Is 87940-0R060 a left or right side mirror?
87940-0R060 is recorded for the left exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87940-0R060 include every electrical function?
The listed feature reference is 7-wire application reference. Ask for written confirmation if the application requires a signal lamp, heating, power fold or a specific pin count.
Should 87940-0R060 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87940-0R060 fitment be confirmed?
Keep the original mirror available until the OE label, door-side footprint and controls have been matched. The complete OE reference and left exterior mirror position should agree before installation.
What should be checked when 87940-0R060 arrives?
Review the edge seals and clips on a clean padded surface to identify transit damage. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
