87910-0R120 Right Exterior Side Mirror Assembly for TOYOTA RAV4 2014
Primary OE reference: 87910-0R120
Cross-reference 1: 87910-0R120
Product type: Exterior Side Mirror Assembly
Applicable vehicle: TOYOTA RAV4 2014
Installation position: Right exterior mirror position
Brand: TOYOTA
Model: RAV4
Vehicle year: 2014
Listed mirror features: 9-wire application reference
Mirror function: Re-establishes the factory-style exterior observation point without treating a similar housing as universal while keeping the OE purchase reference traceable.
Mounting comparison: Photograph the door-side bolt pattern during incoming-part comparison to separate facelift variations.
Electrical review: Separate the harness exit direction without assuming every trim shares one harness before final fitment approval.
Fitment confirmation: Verify production year, trim equipment and left-right orientation because similar housings can use different wiring.
Supplied component scope: Confirm adjustment, lamp and folding requirements in writing when those functions are essential to the repair.
Receiving priority: Inspect the purchase-line label before paint preparation to prevent scratches during handling.
Handling note: Handle the signal lens after unpacking but before installation to prevent scratches during handling.
Wholesale enquiry: Supply the VIN or production date when the stated model year crosses a design change.
Order preparation: Specify the preferred shipping method before freight options are compared to support an accurate B2B quotation.
Internal item code: TY02014-006
87910-0R120 Exterior Side Mirror Assembly Product Overview
87910-0R120 identifies an exterior side mirror assembly for the right exterior mirror position on TOYOTA RAV4 2014. Renews the passenger-side exterior sightline for the stated production year and model so workshop planning starts with the correct part. The page records TY02014-006 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Renews the factory-style exterior observation point without treating a similar housing as universal before paint or finishing work is scheduled. Re-establishes the factory-style exterior observation point inside the vehicle’s original attachment layout so the mirror can be compared against the removed unit. Provides the driver-side rearward viewing point at the recorded door or auxiliary mounting point to support safe rearward observation. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Cross-check the connector shape and pin count with the vehicle year identified to distinguish manual and powered applications. Identify the triangular mounting base with the existing harness accessible before the door trim is disturbed. Identify the triangular mounting base during incoming-part comparison before paint and assembly labour are committed. Check whether the required item is a full assembly, auxiliary mirror or cover before finalising the order.
Electrical and Housing Checks
Protect the reusable electrical hardware at parts-receiving inspection so lamp and adjustment requirements are clear. Verify the harness exit direction before the old mirror is disconnected so manual and electrical variants stay separated. Separate the folding mechanism with each purchase line kept separate so unsupported functions are not claimed. The listed feature reference is 9-wire application reference; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87910-0R120 |
| Cross-reference numbers | 87910-0R120 |
| Internal item code | TY02014-006 |
| Vehicle brand | TOYOTA |
| Vehicle model | RAV4 |
| Model year | 2014 |
| Installation position | Right exterior mirror position |
| Listed mirror features | 9-wire application reference |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Examine the purchase-line label before the component enters workshop stock to protect the visible exterior surface. Support the mounting studs before the component enters workshop stock to identify transit damage. Confirm the mirror adjustment plate with transit packaging retained so connector damage is isolated early. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Include the requested packaging mark on repeat distributor orders so similar mirror housings remain separated. Reference the requested packaging mark before freight options are compared to support accurate packing. Identify the adjustment and lamp requirements on repeat distributor orders before shipping cost is calculated. Send the OE reference, model year, mirror side, quantity and destination for a wholesale quotation.
Frequently Asked Questions
Should 87910-0R120 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87910-0R120 fitment be confirmed?
Keep the original mirror available until the OE label, door-side footprint and controls have been matched. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 87910-0R120 arrives?
Compare the mirror adjustment plate before electrical testing begins to protect the visible exterior surface. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 87910-0R120?
Attach a connector photo if powered functions or lamp equipment must match the vehicle harness. Connector and rear-mount photographs help separate close variants.
What is supplied with 87910-0R120?
Review every saved photograph to confirm the visible glass, housing, base and connector scope before purchase approval. Use the product photographs and written quotation to confirm the final sales scope.
