87706 Blower Motor for TOYOTA
Primary OE reference: 87706
Cross-reference 1: 88550-B2100
Cross-reference 2: 272700-0931
Cross-reference 3: 88550-B2080
Cross-reference 4: 272700-0910
Cross-reference 5: 116340-9751
Product type: Automotive HVAC Blower Motor
Applicable vehicle: TOYOTA
Brand: TOYOTA
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
87706 Automotive Blower Motor Overview
Reference 87706 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6210-117, the 87706 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6210-117 when comparing this 87706 airflow configuration.
OE Reference and Application
The primary catalogue number is 87706. The recorded application is TOYOTA. For 6210-117, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6210-117 with the approved OE reference.
HVAC Interface and 87706 installation
During work on 6210-117, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6210-117 before the lower trim is closed.
For item 6210-117, confirm that the 87706 centrifugal wheel clears its housing and that the 6210-117 connector lock engages without force. After seating 6210-117, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-117.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 87706 |
| Cross-reference numbers | 88550-B2100 / 272700-0931 / 88550-B2080 / 272700-0910 / 116340-9751 |
| Vehicle brand | TOYOTA |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 87706 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6210-117, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6210-117 record remains the picking reference.
For trade item 6210-117, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6210-117 on the packing instruction.
Frequently Asked Questions
How should item 6210-117 and blower number 87706 be verified?
Match 6210-117 to the complete 87706 marking, then compare the 6210-117 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.
Can 6210-117 have more than one vehicle-side blower configuration?
Yes. TOYOTA production changes can affect 6210-117; confirm steering position, climate-control specification and the original 6210-117 geometry before approval.
What circuit checks are useful when 6210-117 does not operate?
For 6210-117, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-117 motor again.
Which details should accompany a wholesale request for 6210-117?
Provide item 6210-117, OE 87706, the stated application, quantity and destination; add 6210-117 carton or private-label requirements separately.
How can noise be avoided after fitting 6210-117?
Clear debris from the air inlet, check that the 6210-117 wheel turns freely, seat the 6210-117 flange evenly and keep wiring away from the impeller.
Request a quote for 6210-117: Send 87706, the 6210-117 application and required quantity for a fitment and supply review.
