87620-4B000 Right Exterior Side Mirror Assembly for HYUNDAI Safe Pickup 1999
Primary OE reference: 87620-4B000
Cross-reference 1: 87620-4B000
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Safe Pickup 1999
Installation position: Right exterior mirror position
Brand: HYUNDAI
Model: Safe Pickup
Vehicle year: 1999
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Reconstructs the door-mounted mirror position during a side-mirror replacement project while preserving the listed fitment identity.
Mounting comparison: Measure the connector shape and pin count against the removed mirror before the door trim is disturbed.
Electrical review: Separate the mirror-heating circuit without assuming every trim shares one harness before reusable parts are transferred.
Fitment confirmation: Confirm HYUNDAI Safe Pickup 1999 and the right side before checking the base outline and connector.
Supplied component scope: Only the identified product line is supplied unless additional mirror caps or hardware are agreed separately.
Receiving priority: Isolate the mirror glass with transit packaging retained before the repair schedule is affected.
Handling note: Isolate the signal lens on a clean padded surface so connector damage is isolated early.
Wholesale enquiry: Supply the VIN or production date when the stated model year crosses a design change.
Order preparation: Reference the complete OE reference before sample approval to keep the OE identity traceable.
Internal item code: HY02014-022
87620-4B000 Exterior Side Mirror Assembly Product Overview
87620-4B000 identifies an exterior side mirror assembly for the right exterior mirror position on HYUNDAI Safe Pickup 1999. Supports the outside viewing surface and housing within the application-specific door geometry so the mirror can be compared against the removed unit. The page records HY02014-022 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Recovers the outside viewing surface and housing after collision, housing or glass damage before trim and wiring are reassembled. Completes the vehicle’s original rearward observation area after the removed part has been identified so workshop planning starts with the correct part. Provides the intended viewing angle beside the cabin for the stated production year and model before paint or finishing work is scheduled. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Verify the left-right orientation against the removed mirror to distinguish manual and powered applications. Match the connector shape and pin count during incoming-part comparison so the plug does not require modification. Measure the manual cable or electrical controls at the exact door position so the plug does not require modification. Confirm HYUNDAI Safe Pickup 1999 and the right side before checking the base outline and connector.
Electrical and Housing Checks
Review the manual control cable with the ignition and battery procedure observed so manual and electrical variants stay separated. Compare the vehicle-side mirror connector before optional functions are promised to prevent a connector mismatch. Confirm the vehicle-side mirror connector without assuming every trim shares one harness so manual and electrical variants stay separated. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87620-4B000 |
| Cross-reference numbers | 87620-4B000 |
| Internal item code | HY02014-022 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Safe Pickup |
| Model year | 1999 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Document the carton-supported corners on a clean padded surface so every received unit can be accounted for. Support the connector terminals before the packaging is discarded so left and right mirrors remain separated. Handle the painted or unpainted cover before electrical testing begins so cracked glass is found immediately. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Confirm the connector-side photograph on the wholesale enquiry to support an accurate B2B quotation. Provide the internal item code when left and right units are combined to reduce warehouse picking errors. Include the destination country when left and right units are combined before shipping cost is calculated. Include HY02014-022 on repeat orders so the requested application remains traceable.
Frequently Asked Questions
Should 87620-4B000 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87620-4B000 fitment be confirmed?
A connector-side photograph and the retained mirror provide the strongest comparison for this application. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 87620-4B000 arrives?
Document the housing shell against the approved reference to identify transit damage. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 87620-4B000?
Confirm the destination country and preferred transport method before export pricing is prepared. Connector and rear-mount photographs help separate close variants.
What is supplied with 87620-4B000?
Painted appearance in a photograph does not replace verification of the required housing and electrical content. Use the product photographs and written quotation to confirm the final sales scope.
