87620-3X000 Right Exterior Side Mirror Assembly for HYUNDAI Elantra 2011
Primary OE reference: 87620-3X000
Cross-reference 1: 87620-3X000
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Elantra 2011
Installation position: Right exterior mirror position
Brand: HYUNDAI
Model: Elantra
Vehicle year: 2011
Listed mirror features: without signal lamp
Mirror function: Restores the exterior mirror mounting envelope for an exterior-body repair quotation so workshop planning starts with the correct part.
Mounting comparison: Confirm the complete OE label before the order is approved to prevent an incorrect housing selection.
Electrical review: Separate the available pin positions while the original unit is still available to identify missing or damaged wiring early.
Fitment confirmation: Use the VIN when a model-year change may alter the base, harness or lamp arrangement.
Supplied component scope: The images define the supplied housing, glass and visible hardware, while vehicle-side wiring remains on the vehicle.
Receiving priority: Review the connector terminals without placing weight on the glass before a distorted base is fitted.
Handling note: Check the housing shell before the component enters workshop stock so cracked glass is found immediately.
Wholesale enquiry: Include HY02014-064 on repeat orders so the requested application remains traceable.
Order preparation: Specify the sample or bulk-order requirement before carton planning so the supplied component scope is clear.
Internal item code: HY02014-064
87620-3X000 Exterior Side Mirror Assembly Product Overview
87620-3X000 identifies an exterior side mirror assembly for the right exterior mirror position on HYUNDAI Elantra 2011. Reconstructs the vehicle’s original rearward observation area during a side-mirror replacement project so workshop planning starts with the correct part. The page records HY02014-064 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Reconstructs the side-specific mirror assembly location for an exterior-body repair quotation without mixing visually similar door mirrors. Renews the factory-style exterior observation point for the stated production year and model before trim and wiring are reassembled. Provides the vehicle’s original rearward observation area during a side-mirror replacement project so the mirror can be compared against the removed unit. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Review the wiring lead and plug position during incoming-part comparison so the plug does not require modification. Verify the connector shape and pin count before the order is approved so the plug does not require modification. Compare the production-date application before the order is approved to confirm the supplied mirror side. Check whether the required item is a full assembly, auxiliary mirror or cover before finalising the order.
Electrical and Housing Checks
Protect the folding mechanism without assuming every trim shares one harness so manual and electrical variants stay separated. Test the reusable electrical hardware using the application notes and physical sample to identify missing or damaged wiring early. Separate the requested functional scope during bench comparison to keep function expectations documented. The listed feature reference is without signal lamp; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87620-3X000 |
| Cross-reference numbers | 87620-3X000 |
| Internal item code | HY02014-064 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Elantra |
| Model year | 2011 |
| Installation position | Right exterior mirror position |
| Listed mirror features | without signal lamp |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Document the mirror adjustment plate without placing weight on the glass to identify transit damage. Check the housing shell under neutral receiving light before any finishing work starts. Assess the mounting studs under neutral receiving light to protect the visible exterior surface. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Confirm the preferred shipping method before freight options are compared to keep the OE identity traceable. Provide the connector-side photograph together with consignee details before shipping cost is calculated. State the destination country with the target delivery timing to support accurate packing. Supply the VIN or production date when the stated model year crosses a design change.
Frequently Asked Questions
How should 87620-3X000 fitment be confirmed?
Compare mounting studs, housing profile and plug shape before approving HY02014-064 for installation. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 87620-3X000 arrives?
Confirm the housing shell after unpacking but before installation to identify transit damage. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 87620-3X000?
Identify body-colour finishing needs separately from the mechanical and electrical mirror specification. Connector and rear-mount photographs help separate close variants.
What is supplied with 87620-3X000?
Ask for written confirmation if the application requires a signal lamp, heating, power fold or a specific pin count. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 87620-3X000 listed for?
The recorded application is HYUNDAI Elantra 2011. Production date, trim equipment and connector details still require physical verification.
