87620-25011 Right Exterior Side Mirror Assembly for HYUNDAI Accent 2000
Primary OE reference: 87620-25011
Cross-reference 1: 87620-25011
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Accent 2000
Installation position: Right exterior mirror position
Brand: HYUNDAI
Model: Accent
Vehicle year: 2000
Listed mirror features: manual adjustment
Mirror function: Supports the passenger-side exterior sightline when the original mirror can no longer be reused so the mirror can be compared against the removed unit.
Mounting comparison: Identify the cover contour and lower edge from the inner mounting face before the door trim is disturbed.
Electrical review: Confirm the reusable electrical hardware using the application notes and physical sample so the supplied scope matches the enquiry.
Fitment confirmation: Check whether the required item is a full assembly, auxiliary mirror or cover before finalising the order.
Supplied component scope: For mixed orders, keep left and right assemblies on separate purchase lines with their own OE references.
Receiving priority: Compare the mirror adjustment plate at warehouse receiving to identify transit damage.
Handling note: Confirm the mirror glass without placing weight on the glass so connector damage is isolated early.
Wholesale enquiry: Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist.
Order preparation: Confirm the connector-side photograph on the wholesale enquiry so lead time can be reviewed correctly.
Internal item code: HY02014-028
87620-25011 Exterior Side Mirror Assembly Product Overview
87620-25011 identifies an exterior side mirror assembly for the right exterior mirror position on HYUNDAI Accent 2000. Supports the driver-side rearward viewing point when the original mirror can no longer be reused while keeping the OE purchase reference traceable. The page records HY02014-028 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Provides the side-specific mirror assembly location for an exterior-body repair quotation to reduce incorrect left-right ordering. Recovers the vehicle’s original rearward observation area after the removed part has been identified while keeping the OE purchase reference traceable. Provides the driver-side rearward viewing point at the recorded door or auxiliary mounting point before trim and wiring are reassembled. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Inspect the wiring lead and plug position from the inner mounting face so electrical functions remain compatible. Verify the wiring lead and plug position before reusable trim is transferred so the base seats without distortion. Measure the complete OE label using clear rear and connector photographs before paint and assembly labour are committed. Check whether the required item is a full assembly, auxiliary mirror or cover before finalising the order.
Electrical and Housing Checks
Review the manual control cable after transit restraints are removed to prevent a connector mismatch. Confirm the mirror-heating circuit with the ignition and battery procedure observed before final fitment approval. Check the harness exit direction during bench comparison to prevent a connector mismatch. The listed feature reference is manual adjustment; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87620-25011 |
| Cross-reference numbers | 87620-25011 |
| Internal item code | HY02014-028 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2000 |
| Installation position | Right exterior mirror position |
| Listed mirror features | manual adjustment |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Check the signal lens with transit packaging retained before the repair schedule is affected. Confirm the edge seals and clips before the packaging is discarded so every received unit can be accounted for. Check the triangular mounting base during sample approval to protect the visible exterior surface. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Confirm the requested quantity before production scheduling to make repeat ordering more reliable. Provide the required mirror side with the target delivery timing to support accurate packing. Attach the original-mirror photograph on repeat distributor orders to keep the OE identity traceable. Confirm the destination country and preferred transport method before export pricing is prepared.
Frequently Asked Questions
Is 87620-25011 a left or right side mirror?
87620-25011 is recorded for the right exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87620-25011 include every electrical function?
The listed feature reference is manual adjustment. Ask for written confirmation if the application requires a signal lamp, heating, power fold or a specific pin count.
Should 87620-25011 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87620-25011 fitment be confirmed?
Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 87620-25011 arrives?
Compare the mirror glass on a clean padded surface to identify transit damage. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
