87620-1R340 Right Exterior Side Mirror Assembly for HYUNDAI Accent 2011
Primary OE reference: 87620-1R340
Cross-reference 1: 87620-1R340
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Accent 2011
Installation position: Right exterior mirror position
Brand: HYUNDAI
Model: Accent
Vehicle year: 2011
Listed mirror features: power adjustment, integrated signal lamp
Mirror function: Supports the outside viewing surface and housing after collision, housing or glass damage so the mirror can be compared against the removed unit.
Mounting comparison: Verify the triangular mounting base against the removed mirror before paint and assembly labour are committed.
Electrical review: Inspect the mirror-heating circuit during bench comparison so the supplied scope matches the enquiry.
Fitment confirmation: Verify production year, trim equipment and left-right orientation because similar housings can use different wiring.
Supplied component scope: Only the identified product line is supplied unless additional mirror caps or hardware are agreed separately.
Receiving priority: Inspect the connector terminals before paint preparation so connector damage is isolated early.
Handling note: Handle the connector terminals without placing weight on the glass to protect the visible exterior surface.
Wholesale enquiry: State sample, carton-marking and delivery requirements together with the required quantity.
Order preparation: Confirm the complete OE reference for every purchase line before a commercial invoice is prepared.
Internal item code: HY02014-044
87620-1R340 Exterior Side Mirror Assembly Product Overview
87620-1R340 identifies an exterior side mirror assembly for the right exterior mirror position on HYUNDAI Accent 2011. Restores the outside viewing surface and housing during a side-mirror replacement project before trim and wiring are reassembled. The page records HY02014-044 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Recovers the factory-style exterior observation point within the application-specific door geometry so the correct side remains easy to verify. Restores the vehicle’s original rearward observation area for repair stock tied to the listed OE reference to match the vehicle-specific housing outline. Reconstructs the door-mounted mirror position for the stated production year and model so the correct side remains easy to verify. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Inspect the triangular mounting base against the removed mirror to confirm the supplied mirror side. Align the signal-lamp opening during incoming-part comparison to avoid a trim-level mismatch. Photograph the manual cable or electrical controls at the exact door position so the base seats without distortion. Do not rely on housing colour alone; mounting geometry and the complete OE identity are more reliable.
Electrical and Housing Checks
Review the lamp lens and terminals before the inner door panel is refitted so the supplied scope matches the enquiry. Test the turn-signal wiring after transit restraints are removed before the workshop schedules installation. Review the vehicle-side mirror connector using the application notes and physical sample to prevent a connector mismatch. The listed feature reference is power adjustment, integrated signal lamp; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87620-1R340 |
| Cross-reference numbers | 87620-1R340 |
| Internal item code | HY02014-044 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2011 |
| Installation position | Right exterior mirror position |
| Listed mirror features | power adjustment, integrated signal lamp |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Inspect the connector terminals after unpacking but before installation to prevent scratches during handling. Isolate the mounting studs at warehouse receiving so left and right mirrors remain separated. Support the mirror glass during sample approval before any finishing work starts. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Submit the preferred shipping method before sample approval so the supplied component scope is clear. Specify the original-mirror photograph when mixed-model stock is required so left-right quantities remain correct. Identify the requested packaging mark when left and right units are combined to reduce warehouse picking errors. List left and right quantities separately when a mixed-side distributor order is requested.
Frequently Asked Questions
What information is needed to quote 87620-1R340?
State sample, carton-marking and delivery requirements together with the required quantity. Connector and rear-mount photographs help separate close variants.
What is supplied with 87620-1R340?
Only the identified product line is supplied unless additional mirror caps or hardware are agreed separately. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 87620-1R340 listed for?
The recorded application is HYUNDAI Accent 2011. Production date, trim equipment and connector details still require physical verification.
Can 87620-1R340 fit every Accent model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
How should 87620-1R340 be handled during installation?
Confirm the purchase-line label without placing weight on the glass to prevent scratches during handling. Avoid supporting the assembly by the glass or forcing the folding joint.
