87620-1R000 Right Exterior Side Mirror Assembly for HYUNDAI Accent 2011
Primary OE reference: 87620-1R000
Cross-reference 1: 87620-1R000
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Accent 2011
Installation position: Right exterior mirror position
Brand: HYUNDAI
Model: Accent
Vehicle year: 2011
Listed mirror features: manual adjustment
Mirror function: Completes the vehicle’s original rearward observation area after collision, housing or glass damage while maintaining the intended exterior appearance.
Mounting comparison: Confirm the cover contour and lower edge using the VIN when year boundaries overlap so the base seats without distortion.
Electrical review: Trace the lamp lens and terminals while the original unit is still available so manual and electrical variants stay separated.
Fitment confirmation: Do not rely on housing colour alone; mounting geometry and the complete OE identity are more reliable.
Supplied component scope: The quotation should state whether a complete mirror, mirror cover or auxiliary unit is required.
Receiving priority: Handle the mirror adjustment plate without placing weight on the glass before the repair schedule is affected.
Handling note: Check the signal lens under neutral receiving light before any finishing work starts.
Wholesale enquiry: Identify body-colour finishing needs separately from the mechanical and electrical mirror specification.
Order preparation: Provide the destination country with the export quotation request so similar mirror housings remain separated.
Internal item code: HY02014-046
87620-1R000 Exterior Side Mirror Assembly Product Overview
87620-1R000 identifies an exterior side mirror assembly for the right exterior mirror position on HYUNDAI Accent 2011. Provides the mirror base and visible rearward field inside the vehicle’s original attachment layout so the mirror can be compared against the removed unit. The page records HY02014-046 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Replaces the model-shaped mirror footprint with the left or right position clearly separated while maintaining the intended exterior appearance. Provides the exterior mirror mounting envelope after the removed part has been identified to match the vehicle-specific housing outline. Preserves the mirror base and visible rearward field after the removed part has been identified before paint or finishing work is scheduled. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Photograph the connector shape and pin count using clear rear and connector photographs so the base seats without distortion. Measure the cover contour and lower edge before body-color work begins so the base seats without distortion. Record the folding joint and base angle before body-color work begins to avoid a trim-level mismatch. Use 87620-1R000 as the purchasing reference, then compare the right exterior mirror position with the removed component.
Electrical and Housing Checks
Inspect the manual control cable before the inner door panel is refitted so unsupported functions are not claimed. Identify the manual control cable before optional functions are promised so manual and electrical variants stay separated. Confirm the reusable electrical hardware with each purchase line kept separate before a powered mirror is operated. The listed feature reference is manual adjustment; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87620-1R000 |
| Cross-reference numbers | 87620-1R000 |
| Internal item code | HY02014-046 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2011 |
| Installation position | Right exterior mirror position |
| Listed mirror features | manual adjustment |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Check the mounting studs at warehouse receiving before the repair schedule is affected. Review the signal lens before paint preparation to prevent scratches during handling. Isolate the connector terminals on a clean padded surface to prevent scratches during handling. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Provide the required mirror side together with consignee details to support an accurate B2B quotation. Specify the internal item code for every purchase line to make repeat ordering more reliable. Separate the preferred shipping method before carton planning so left-right quantities remain correct. State sample, carton-marking and delivery requirements together with the required quantity.
Frequently Asked Questions
Is 87620-1R000 a left or right side mirror?
87620-1R000 is recorded for the right exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87620-1R000 include every electrical function?
The listed feature reference is manual adjustment. For mixed orders, keep left and right assemblies on separate purchase lines with their own OE references.
Should 87620-1R000 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87620-1R000 fitment be confirmed?
A connector-side photograph and the retained mirror provide the strongest comparison for this application. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 87620-1R000 arrives?
Inspect the housing shell with transit packaging retained so left and right mirrors remain separated. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
