87620-1E040 Right Exterior Side Mirror Assembly for HYUNDAI Accent 2006
Primary OE reference: 87620-1E040
Cross-reference 1: 87620-1E040
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Accent 2006
Installation position: Right exterior mirror position
Brand: HYUNDAI
Model: Accent
Vehicle year: 2006
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Maintains the driver-side rearward viewing point during a side-mirror replacement project to support safe rearward observation.
Mounting comparison: Align the folding joint and base angle against a retained original sample to avoid a trim-level mismatch.
Electrical review: Confirm the mirror-heating circuit before energising a replacement assembly so unsupported functions are not claimed.
Fitment confirmation: Confirm HYUNDAI Accent 2006 and the right side before checking the base outline and connector.
Supplied component scope: For mixed orders, keep left and right assemblies on separate purchase lines with their own OE references.
Receiving priority: Check the purchase-line label during sample approval before a distorted base is fitted.
Handling note: Assess the housing shell after unpacking but before installation to prevent scratches during handling.
Wholesale enquiry: Identify body-colour finishing needs separately from the mechanical and electrical mirror specification.
Order preparation: Include the complete OE reference on repeat distributor orders so similar mirror housings remain separated.
Internal item code: HY02014-040
87620-1E040 Exterior Side Mirror Assembly Product Overview
87620-1E040 identifies an exterior side mirror assembly for the right exterior mirror position on HYUNDAI Accent 2006. Completes the passenger-side exterior sightline inside the vehicle’s original attachment layout so the correct side remains easy to verify. The page records HY02014-040 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Supports the passenger-side exterior sightline without treating a similar housing as universal to reduce incorrect left-right ordering. Maintains the intended viewing angle beside the cabin inside the vehicle’s original attachment layout while keeping the OE purchase reference traceable. Completes the exterior mirror mounting envelope during a side-mirror replacement project so the correct side remains easy to verify. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Confirm the cover contour and lower edge with the existing harness accessible so electrical functions remain compatible. Measure the production-date application before reusable trim is transferred so electrical functions remain compatible. Inspect the door-side bolt pattern using clear rear and connector photographs to avoid a trim-level mismatch. Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Electrical and Housing Checks
Separate the reusable electrical hardware after transit restraints are removed to prevent a connector mismatch. Check the folding mechanism before the old mirror is disconnected to prevent a connector mismatch. Separate the reusable electrical hardware before the old mirror is disconnected so lamp and adjustment requirements are clear. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87620-1E040 |
| Cross-reference numbers | 87620-1E040 |
| Internal item code | HY02014-040 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2006 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Support the folding pivot without placing weight on the glass to prevent scratches during handling. Confirm the purchase-line label on a clean padded surface to keep the correct SKU traceable. Review the triangular mounting base before paint preparation to protect the visible exterior surface. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
State the complete OE reference with the export quotation request so similar mirror housings remain separated. Record the requested quantity on the wholesale enquiry so lead time can be reviewed correctly. Include the required mirror side before freight options are compared to reduce warehouse picking errors. Send the OE reference, model year, mirror side, quantity and destination for a wholesale quotation.
Frequently Asked Questions
Is 87620-1E040 a left or right side mirror?
87620-1E040 is recorded for the right exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87620-1E040 include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. Review every saved photograph to confirm the visible glass, housing, base and connector scope before purchase approval.
Should 87620-1E040 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87620-1E040 fitment be confirmed?
A connector-side photograph and the retained mirror provide the strongest comparison for this application. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 87620-1E040 arrives?
Inspect the mirror glass at warehouse receiving before any finishing work starts. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
