87620-1E030 Right Exterior Side Mirror Assembly for HYUNDAI Accent 2006
Primary OE reference: 87620-1E030
Cross-reference 1: 87620-1E030
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Accent 2006
Installation position: Right exterior mirror position
Brand: HYUNDAI
Model: Accent
Vehicle year: 2006
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Replaces the vehicle’s original rearward observation area at the recorded door or auxiliary mounting point while maintaining the intended exterior appearance.
Mounting comparison: Identify the complete OE label using the VIN when year boundaries overlap to avoid a trim-level mismatch.
Electrical review: Trace the plug keying and latch before the old mirror is disconnected so unsupported functions are not claimed.
Fitment confirmation: Verify production year, trim equipment and left-right orientation because similar housings can use different wiring.
Supplied component scope: The quotation should state whether a complete mirror, mirror cover or auxiliary unit is required.
Receiving priority: Handle the folding pivot without placing weight on the glass so left and right mirrors remain separated.
Handling note: Check the mirror adjustment plate at warehouse receiving to prevent scratches during handling.
Wholesale enquiry: Attach a connector photo if powered functions or lamp equipment must match the vehicle harness.
Order preparation: Specify the internal item code when mixed-model stock is required so similar mirror housings remain separated.
Internal item code: HY02014-038
87620-1E030 Exterior Side Mirror Assembly Product Overview
87620-1E030 identifies an exterior side mirror assembly for the right exterior mirror position on HYUNDAI Accent 2006. Maintains the outside viewing surface and housing for an exterior-body repair quotation before paint or finishing work is scheduled. The page records HY02014-038 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Restores the exterior mirror mounting envelope when the original mirror can no longer be reused without mixing visually similar door mirrors. Supports the intended viewing angle beside the cabin without treating a similar housing as universal before paint or finishing work is scheduled. Maintains the driver-side rearward viewing point at the recorded door or auxiliary mounting point to reduce incorrect left-right ordering. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Compare the connector shape and pin count with the vehicle year identified so electrical functions remain compatible. Verify the signal-lamp opening from the inner mounting face before paint and assembly labour are committed. Compare the left-right orientation at the exact door position so electrical functions remain compatible. Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Electrical and Housing Checks
Separate the available pin positions using the application notes and physical sample before final fitment approval. Inspect the plug keying and latch during bench comparison to identify missing or damaged wiring early. Test the requested functional scope at parts-receiving inspection before a powered mirror is operated. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87620-1E030 |
| Cross-reference numbers | 87620-1E030 |
| Internal item code | HY02014-038 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2006 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Compare the triangular mounting base on a clean padded surface to keep the correct SKU traceable. Assess the mirror glass under neutral receiving light to prevent scratches during handling. Protect the mirror adjustment plate without placing weight on the glass to protect the visible exterior surface. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Submit the destination country when left and right units are combined to reduce warehouse picking errors. Include the vehicle model and year on repeat distributor orders so lead time can be reviewed correctly. Identify the requested quantity before sample approval to make repeat ordering more reliable. Include HY02014-038 on repeat orders so the requested application remains traceable.
Frequently Asked Questions
Does 87620-1E030 include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. For mixed orders, keep left and right assemblies on separate purchase lines with their own OE references.
Should 87620-1E030 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87620-1E030 fitment be confirmed?
Use the VIN when a model-year change may alter the base, harness or lamp arrangement. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 87620-1E030 arrives?
Support the signal lens during sample approval so every received unit can be accounted for. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 87620-1E030?
State sample, carton-marking and delivery requirements together with the required quantity. Connector and rear-mount photographs help separate close variants.
