87620-1C000 Right Exterior Side Mirror Assembly for HYUNDAI Getz 2002
Primary OE reference: 87620-1C000
Cross-reference 1: 87620-1C000
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Getz 2002
Installation position: Right exterior mirror position
Brand: HYUNDAI
Model: Getz
Vehicle year: 2002
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Replaces the door-mounted mirror position for the stated production year and model to match the vehicle-specific housing outline.
Mounting comparison: Photograph the connector shape and pin count before reusable trim is transferred to prevent an incorrect housing selection.
Electrical review: Identify the available pin positions while the original unit is still available before final fitment approval.
Fitment confirmation: Use the VIN when a model-year change may alter the base, harness or lamp arrangement.
Supplied component scope: For mixed orders, keep left and right assemblies on separate purchase lines with their own OE references.
Receiving priority: Isolate the mounting studs at warehouse receiving before a distorted base is fitted.
Handling note: Confirm the housing shell before electrical testing begins to protect the visible exterior surface.
Wholesale enquiry: Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist.
Order preparation: Provide the destination country before freight options are compared so the supplied component scope is clear.
Internal item code: HY02014-018
87620-1C000 Exterior Side Mirror Assembly Product Overview
87620-1C000 identifies an exterior side mirror assembly for the right exterior mirror position on HYUNDAI Getz 2002. Reconstructs the mirror base and visible rearward field during a side-mirror replacement project so the mirror can be compared against the removed unit. The page records HY02014-018 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Supports the model-shaped mirror footprint for repair stock tied to the listed OE reference while preserving the listed fitment identity. Replaces the driver-side rearward viewing point within the application-specific door geometry so workshop planning starts with the correct part. Restores the driver-side rearward viewing point when the original mirror can no longer be reused while preserving the listed fitment identity. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Verify the production-date application from the inner mounting face so the base seats without distortion. Inspect the connector shape and pin count during incoming-part comparison before paint and assembly labour are committed. Cross-check the signal-lamp opening against the removed mirror before the door trim is disturbed. Do not rely on housing colour alone; mounting geometry and the complete OE identity are more reliable.
Electrical and Housing Checks
Check the mirror-heating circuit with the ignition and battery procedure observed before a powered mirror is operated. Protect the available pin positions while the original unit is still available to keep function expectations documented. Review the adjustment control type while the original unit is still available so manual and electrical variants stay separated. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87620-1C000 |
| Cross-reference numbers | 87620-1C000 |
| Internal item code | HY02014-018 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Getz |
| Model year | 2002 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Compare the carton-supported corners at warehouse receiving to keep the correct SKU traceable. Isolate the connector terminals before electrical testing begins so connector damage is isolated early. Isolate the mirror adjustment plate during sample approval before the repair schedule is affected. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
State the original-mirror photograph when mixed-model stock is required to support accurate packing. Provide the internal item code when mixed-model stock is required to support an accurate B2B quotation. Reference the requested quantity before freight options are compared to make repeat ordering more reliable. Confirm the destination country and preferred transport method before export pricing is prepared.
Frequently Asked Questions
What is supplied with 87620-1C000?
The images define the supplied housing, glass and visible hardware, while vehicle-side wiring remains on the vehicle. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 87620-1C000 listed for?
The recorded application is HYUNDAI Getz 2002. Production date, trim equipment and connector details still require physical verification.
Can 87620-1C000 fit every Getz model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
How should 87620-1C000 be handled during installation?
Assess the edge seals and clips before the component enters workshop stock to protect the visible exterior surface. Avoid supporting the assembly by the glass or forcing the folding joint.
Is 87620-1C000 a left or right side mirror?
87620-1C000 is recorded for the right exterior mirror position. Compare the mounting base orientation with the removed part.
