87620-02001 Right Exterior Side Mirror Assembly for HYUNDAI Atos 1998
Primary OE reference: 87620-02001
Cross-reference 1: 87620-02001
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Atos 1998
Installation position: Right exterior mirror position
Brand: HYUNDAI
Model: Atos
Vehicle year: 1998
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Re-establishes the driver-side rearward viewing point for an exterior-body repair quotation without mixing visually similar door mirrors.
Mounting comparison: Compare the door-side bolt pattern with the vehicle year identified so the plug does not require modification.
Electrical review: Protect the vehicle-side mirror connector without assuming every trim shares one harness to keep function expectations documented.
Fitment confirmation: Confirm HYUNDAI Atos 1998 and the right side before checking the base outline and connector.
Supplied component scope: Reusable caps, screws and internal door pieces are not automatically included with the listed mirror component.
Receiving priority: Assess the mirror adjustment plate at warehouse receiving to protect the visible exterior surface.
Handling note: Confirm the edge seals and clips before the component enters workshop stock to prevent scratches during handling.
Wholesale enquiry: Send the OE reference, model year, mirror side, quantity and destination for a wholesale quotation.
Order preparation: Specify the internal item code together with consignee details so similar mirror housings remain separated.
Internal item code: HY02014-002
87620-02001 Exterior Side Mirror Assembly Product Overview
87620-02001 identifies an exterior side mirror assembly for the right exterior mirror position on HYUNDAI Atos 1998. Provides the mirror base and visible rearward field inside the vehicle’s original attachment layout to match the vehicle-specific housing outline. The page records HY02014-002 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Maintains the factory-style exterior observation point during a side-mirror replacement project before trim and wiring are reassembled. Restores the vehicle’s original rearward observation area without treating a similar housing as universal to reduce incorrect left-right ordering. Maintains the mirror base and visible rearward field when the original mirror can no longer be reused so workshop planning starts with the correct part. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Align the manual cable or electrical controls with the existing harness accessible so the original fasteners align correctly. Verify the left-right orientation against the removed mirror to prevent an incorrect housing selection. Match the folding joint and base angle against the removed mirror so the plug does not require modification. Use 87620-02001 as the purchasing reference, then compare the right exterior mirror position with the removed component.
Electrical and Housing Checks
Review the available pin positions before optional functions are promised to avoid damaging vehicle-side terminals. Verify the available pin positions with each purchase line kept separate to prevent a connector mismatch. Check the lamp lens and terminals after transit restraints are removed before final fitment approval. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87620-02001 |
| Cross-reference numbers | 87620-02001 |
| Internal item code | HY02014-002 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Atos |
| Model year | 1998 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Isolate the signal lens on a clean padded surface to protect the visible exterior surface. Check the triangular mounting base after unpacking but before installation to prevent scratches during handling. Examine the signal lens on a clean padded surface before a distorted base is fitted. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
State the requested packaging mark when mixed-model stock is required before a commercial invoice is prepared. Provide the complete OE reference on repeat distributor orders before a commercial invoice is prepared. Separate the vehicle model and year together with consignee details so left-right quantities remain correct. Attach a connector photo if powered functions or lamp equipment must match the vehicle harness.
Frequently Asked Questions
Should 87620-02001 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87620-02001 fitment be confirmed?
Verify production year, trim equipment and left-right orientation because similar housings can use different wiring. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 87620-02001 arrives?
Document the mirror adjustment plate after unpacking but before installation to identify transit damage. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 87620-02001?
State sample, carton-marking and delivery requirements together with the required quantity. Connector and rear-mount photographs help separate close variants.
What is supplied with 87620-02001?
For mixed orders, keep left and right assemblies on separate purchase lines with their own OE references. Use the product photographs and written quotation to confirm the final sales scope.
