87610-H6430 Left Exterior Side Mirror Assembly for HYUNDAI Accent 2017
Primary OE reference: 87610-H6430
Cross-reference 1: 87610-H6430
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Accent 2017
Installation position: Left exterior mirror position
Brand: HYUNDAI
Model: Accent
Vehicle year: 2017
Listed mirror features: integrated signal lamp
Mirror function: Completes the model-shaped mirror footprint inside the vehicle’s original attachment layout to support safe rearward observation.
Mounting comparison: Inspect the production-date application at the exact door position so electrical functions remain compatible.
Electrical review: Inspect the reusable electrical hardware with each purchase line kept separate before a powered mirror is operated.
Fitment confirmation: Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Supplied component scope: Ask for written confirmation if the application requires a signal lamp, heating, power fold or a specific pin count.
Receiving priority: Handle the folding pivot against the approved reference so connector damage is isolated early.
Handling note: Document the connector terminals with transit packaging retained so left and right mirrors remain separated.
Wholesale enquiry: Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist.
Order preparation: Identify the complete OE reference before sample approval so left-right quantities remain correct.
Internal item code: HY02014-049
87610-H6430 Exterior Side Mirror Assembly Product Overview
87610-H6430 identifies an exterior side mirror assembly for the left exterior mirror position on HYUNDAI Accent 2017. Renews the driver-side rearward viewing point with the left or right position clearly separated while preserving the listed fitment identity. The page records HY02014-049 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Returns the side-specific mirror assembly location inside the vehicle’s original attachment layout to reduce incorrect left-right ordering. Returns the side-specific mirror assembly location without treating a similar housing as universal so workshop planning starts with the correct part. Preserves the driver-side rearward viewing point inside the vehicle’s original attachment layout so workshop planning starts with the correct part. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Photograph the cover contour and lower edge with the existing harness accessible so the original fasteners align correctly. Record the folding joint and base angle with the existing harness accessible so the base seats without distortion. Inspect the production-date application using clear rear and connector photographs to distinguish manual and powered applications. Use 87610-H6430 as the purchasing reference, then compare the left exterior mirror position with the removed component.
Electrical and Housing Checks
Test the available pin positions with the ignition and battery procedure observed before a powered mirror is operated. Trace the mirror-heating circuit before the old mirror is disconnected so lamp and adjustment requirements are clear. Check the reusable electrical hardware without assuming every trim shares one harness to prevent a connector mismatch. The listed feature reference is integrated signal lamp; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87610-H6430 |
| Cross-reference numbers | 87610-H6430 |
| Internal item code | HY02014-049 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2017 |
| Installation position | Left exterior mirror position |
| Listed mirror features | integrated signal lamp |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Check the edge seals and clips without placing weight on the glass so connector damage is isolated early. Review the mirror adjustment plate on a clean padded surface before any finishing work starts. Compare the signal lens with transit packaging retained to prevent scratches during handling. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Attach the vehicle model and year before production scheduling so similar mirror housings remain separated. Submit the requested quantity for every purchase line before electrical variants are quoted. Submit the original-mirror photograph when left and right units are combined so similar mirror housings remain separated. Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist.
Frequently Asked Questions
Is 87610-H6430 a left or right side mirror?
87610-H6430 is recorded for the left exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87610-H6430 include every electrical function?
The listed feature reference is integrated signal lamp. The quotation should state whether a complete mirror, mirror cover or auxiliary unit is required.
Should 87610-H6430 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87610-H6430 fitment be confirmed?
Check whether the required item is a full assembly, auxiliary mirror or cover before finalising the order. The complete OE reference and left exterior mirror position should agree before installation.
What should be checked when 87610-H6430 arrives?
Handle the mirror glass against the approved reference to protect the visible exterior surface. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
