87610-C4000 Left Exterior Side Mirror Assembly for HYUNDAI Atos 2021
Primary OE reference: 87610-C4000
Cross-reference 1: 87610-C4000
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Atos 2021
Installation position: Left exterior mirror position
Brand: HYUNDAI
Model: Atos
Vehicle year: 2021
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Returns the intended viewing angle beside the cabin after collision, housing or glass damage while keeping the OE purchase reference traceable.
Mounting comparison: Review the signal-lamp opening from the inner mounting face before the part enters installation work.
Electrical review: Verify the available pin positions at parts-receiving inspection so lamp and adjustment requirements are clear.
Fitment confirmation: Confirm HYUNDAI Atos 2021 and the left side before checking the base outline and connector.
Supplied component scope: The images define the supplied housing, glass and visible hardware, while vehicle-side wiring remains on the vehicle.
Receiving priority: Review the housing shell against the approved reference to identify transit damage.
Handling note: Document the mirror glass before the packaging is discarded so every received unit can be accounted for.
Wholesale enquiry: State sample, carton-marking and delivery requirements together with the required quantity.
Order preparation: Identify the required mirror side on the wholesale enquiry to support accurate packing.
Internal item code: HY02014-015
87610-C4000 Exterior Side Mirror Assembly Product Overview
87610-C4000 identifies an exterior side mirror assembly for the left exterior mirror position on HYUNDAI Atos 2021. Supports the roadside awareness point beside the front door for the stated production year and model so the correct side remains easy to verify. The page records HY02014-015 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Recovers the driver-side rearward viewing point after collision, housing or glass damage while maintaining the intended exterior appearance. Renews the roadside awareness point beside the front door for the stated production year and model to match the vehicle-specific housing outline. Renews the outside viewing surface and housing for the stated production year and model while preserving the listed fitment identity. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Inspect the glass outline and housing profile against the removed mirror to prevent an incorrect housing selection. Compare the manual cable or electrical controls using clear rear and connector photographs to avoid a trim-level mismatch. Inspect the complete OE label against the removed mirror to confirm the supplied mirror side. Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Electrical and Housing Checks
Document the folding mechanism before the inner door panel is refitted to identify missing or damaged wiring early. Check the plug keying and latch before the old mirror is disconnected so unsupported functions are not claimed. Document the vehicle-side mirror connector before the inner door panel is refitted so the supplied scope matches the enquiry. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87610-C4000 |
| Cross-reference numbers | 87610-C4000 |
| Internal item code | HY02014-015 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Atos |
| Model year | 2021 |
| Installation position | Left exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Inspect the mirror adjustment plate after unpacking but before installation so every received unit can be accounted for. Inspect the painted or unpainted cover on a clean padded surface so every received unit can be accounted for. Isolate the purchase-line label on a clean padded surface so every received unit can be accounted for. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Attach the complete OE reference when left and right units are combined so similar mirror housings remain separated. Separate the requested quantity before sample approval to reduce warehouse picking errors. Confirm the connector-side photograph before carton planning to keep the OE identity traceable. Attach a connector photo if powered functions or lamp equipment must match the vehicle harness.
Frequently Asked Questions
How should 87610-C4000 be handled during installation?
Confirm the triangular mounting base on a clean padded surface before the repair schedule is affected. Avoid supporting the assembly by the glass or forcing the folding joint.
Is 87610-C4000 a left or right side mirror?
87610-C4000 is recorded for the left exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87610-C4000 include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. The quotation should state whether a complete mirror, mirror cover or auxiliary unit is required.
Should 87610-C4000 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87610-C4000 fitment be confirmed?
Use 87610-C4000 as the purchasing reference, then compare the left exterior mirror position with the removed component. The complete OE reference and left exterior mirror position should agree before installation.
