87610-3X010 Left Exterior Side Mirror Assembly for HYUNDAI Elantra 2011
Primary OE reference: 87610-3X010
Cross-reference 1: 87610-3X010
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Elantra 2011
Installation position: Left exterior mirror position
Brand: HYUNDAI
Model: Elantra
Vehicle year: 2011
Listed mirror features: integrated signal lamp
Mirror function: Re-establishes the door-mounted mirror position for an exterior-body repair quotation before paint or finishing work is scheduled.
Mounting comparison: Measure the wiring lead and plug position at the exact door position before the part enters installation work.
Electrical review: Review the requested functional scope without assuming every trim shares one harness before reusable parts are transferred.
Fitment confirmation: Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins.
Supplied component scope: Confirm adjustment, lamp and folding requirements in writing when those functions are essential to the repair.
Receiving priority: Support the mirror glass before the packaging is discarded to protect the visible exterior surface.
Handling note: Support the triangular mounting base under neutral receiving light so left and right mirrors remain separated.
Wholesale enquiry: Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist.
Order preparation: Attach the complete OE reference when left and right units are combined before shipping cost is calculated.
Internal item code: HY02014-061
87610-3X010 Exterior Side Mirror Assembly Product Overview
87610-3X010 identifies an exterior side mirror assembly for the left exterior mirror position on HYUNDAI Elantra 2011. Provides the passenger-side exterior sightline with the left or right position clearly separated so the correct side remains easy to verify. The page records HY02014-061 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Completes the driver-side rearward viewing point after the removed part has been identified so the mirror can be compared against the removed unit. Re-establishes the intended viewing angle beside the cabin for the stated production year and model while preserving the listed fitment identity. Supports the outside viewing surface and housing for repair stock tied to the listed OE reference so the correct side remains easy to verify. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Photograph the complete OE label before the order is approved to prevent an incorrect housing selection. Match the cover contour and lower edge from the inner mounting face before paint and assembly labour are committed. Photograph the manual cable or electrical controls against a retained original sample to prevent an incorrect housing selection. Check whether the required item is a full assembly, auxiliary mirror or cover before finalising the order.
Electrical and Housing Checks
Separate the folding mechanism while the original unit is still available before a powered mirror is operated. Review the mirror-heating circuit without assuming every trim shares one harness before reusable parts are transferred. Trace the lamp lens and terminals before optional functions are promised to keep function expectations documented. The listed feature reference is integrated signal lamp; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87610-3X010 |
| Cross-reference numbers | 87610-3X010 |
| Internal item code | HY02014-061 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Elantra |
| Model year | 2011 |
| Installation position | Left exterior mirror position |
| Listed mirror features | integrated signal lamp |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Compare the painted or unpainted cover under neutral receiving light so connector damage is isolated early. Support the edge seals and clips at warehouse receiving so left and right mirrors remain separated. Support the carton-supported corners with transit packaging retained so every received unit can be accounted for. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Provide the adjustment and lamp requirements before production scheduling so lead time can be reviewed correctly. Specify the required mirror side before sample approval to reduce warehouse picking errors. Record the adjustment and lamp requirements before carton planning so the supplied component scope is clear. Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist.
Frequently Asked Questions
How should 87610-3X010 fitment be confirmed?
Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins. The complete OE reference and left exterior mirror position should agree before installation.
What should be checked when 87610-3X010 arrives?
Isolate the folding pivot against the approved reference so left and right mirrors remain separated. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 87610-3X010?
Confirm the destination country and preferred transport method before export pricing is prepared. Connector and rear-mount photographs help separate close variants.
What is supplied with 87610-3X010?
For mixed orders, keep left and right assemblies on separate purchase lines with their own OE references. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 87610-3X010 listed for?
The recorded application is HYUNDAI Elantra 2011. Production date, trim equipment and connector details still require physical verification.
