87610-2H000 Left Exterior Side Mirror Assembly for HYUNDAI Elantra 2007
Primary OE reference: 87610-2H000
Cross-reference 1: 87610-2H000
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Elantra 2007
Installation position: Left exterior mirror position
Brand: HYUNDAI
Model: Elantra
Vehicle year: 2007
Listed mirror features: without signal lamp
Mirror function: Preserves the driver-side rearward viewing point when the original mirror can no longer be reused to support safe rearward observation.
Mounting comparison: Align the manual cable or electrical controls against the removed mirror before paint and assembly labour are committed.
Electrical review: Inspect the adjustment control type at parts-receiving inspection so unsupported functions are not claimed.
Fitment confirmation: A connector-side photograph and the retained mirror provide the strongest comparison for this application.
Supplied component scope: Confirm adjustment, lamp and folding requirements in writing when those functions are essential to the repair.
Receiving priority: Compare the carton-supported corners on a clean padded surface before a distorted base is fitted.
Handling note: Examine the housing shell under neutral receiving light to protect the visible exterior surface.
Wholesale enquiry: State sample, carton-marking and delivery requirements together with the required quantity.
Order preparation: Identify the requested packaging mark before carton planning so the supplied component scope is clear.
Internal item code: HY02014-059
87610-2H000 Exterior Side Mirror Assembly Product Overview
87610-2H000 identifies an exterior side mirror assembly for the left exterior mirror position on HYUNDAI Elantra 2007. Reconstructs the door-mounted mirror position with the left or right position clearly separated while preserving the listed fitment identity. The page records HY02014-059 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Restores the factory-style exterior observation point at the recorded door or auxiliary mounting point while maintaining the intended exterior appearance. Reconstructs the door-mounted mirror position for an exterior-body repair quotation while preserving the listed fitment identity. Reconstructs the factory-style exterior observation point for an exterior-body repair quotation so workshop planning starts with the correct part. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Cross-check the glass outline and housing profile from the inner mounting face to avoid a trim-level mismatch. Verify the signal-lamp opening before the order is approved to avoid a trim-level mismatch. Cross-check the left-right orientation during incoming-part comparison before the door trim is disturbed. Use 87610-2H000 as the purchasing reference, then compare the left exterior mirror position with the removed component.
Electrical and Housing Checks
Identify the plug keying and latch while the original unit is still available to prevent a connector mismatch. Trace the reusable electrical hardware at parts-receiving inspection before a powered mirror is operated. Confirm the mirror-heating circuit while the original unit is still available so the supplied scope matches the enquiry. The listed feature reference is without signal lamp; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87610-2H000 |
| Cross-reference numbers | 87610-2H000 |
| Internal item code | HY02014-059 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Elantra |
| Model year | 2007 |
| Installation position | Left exterior mirror position |
| Listed mirror features | without signal lamp |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Inspect the mirror glass before the component enters workshop stock so cracked glass is found immediately. Support the mirror adjustment plate before electrical testing begins to prevent scratches during handling. Confirm the housing shell before paint preparation to identify transit damage. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Specify the vehicle model and year before freight options are compared so left-right quantities remain correct. Attach the connector-side photograph with the target delivery timing so left-right quantities remain correct. Submit the destination country on the wholesale enquiry before electrical variants are quoted. State sample, carton-marking and delivery requirements together with the required quantity.
Frequently Asked Questions
Does 87610-2H000 include every electrical function?
The listed feature reference is without signal lamp. Painted appearance in a photograph does not replace verification of the required housing and electrical content.
Should 87610-2H000 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87610-2H000 fitment be confirmed?
A connector-side photograph and the retained mirror provide the strongest comparison for this application. The complete OE reference and left exterior mirror position should agree before installation.
What should be checked when 87610-2H000 arrives?
Examine the connector terminals before the packaging is discarded to keep the correct SKU traceable. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 87610-2H000?
Identify body-colour finishing needs separately from the mechanical and electrical mirror specification. Connector and rear-mount photographs help separate close variants.
