87610-1R340 Left Exterior Side Mirror Assembly for HYUNDAI Accent 2011
Primary OE reference: 87610-1R340
Cross-reference 1: 87610-1R340
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Accent 2011
Installation position: Left exterior mirror position
Brand: HYUNDAI
Model: Accent
Vehicle year: 2011
Listed mirror features: power adjustment, integrated signal lamp
Mirror function: Restores the outside viewing surface and housing during a side-mirror replacement project to reduce incorrect left-right ordering.
Mounting comparison: Inspect the glass outline and housing profile from the inner mounting face so electrical functions remain compatible.
Electrical review: Verify the mirror-heating circuit at parts-receiving inspection before reusable parts are transferred.
Fitment confirmation: Confirm HYUNDAI Accent 2011 and the left side before checking the base outline and connector.
Supplied component scope: Confirm adjustment, lamp and folding requirements in writing when those functions are essential to the repair.
Receiving priority: Support the signal lens without placing weight on the glass so cracked glass is found immediately.
Handling note: Check the mounting studs during sample approval so cracked glass is found immediately.
Wholesale enquiry: State sample, carton-marking and delivery requirements together with the required quantity.
Order preparation: Separate the adjustment and lamp requirements when left and right units are combined to make repeat ordering more reliable.
Internal item code: HY02014-043
87610-1R340 Exterior Side Mirror Assembly Product Overview
87610-1R340 identifies an exterior side mirror assembly for the left exterior mirror position on HYUNDAI Accent 2011. Completes the driver-side rearward viewing point after collision, housing or glass damage so workshop planning starts with the correct part. The page records HY02014-043 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Maintains the outside viewing surface and housing after the removed part has been identified to support safe rearward observation. Provides the side-specific mirror assembly location when the original mirror can no longer be reused to match the vehicle-specific housing outline. Restores the mirror base and visible rearward field for an exterior-body repair quotation to reduce incorrect left-right ordering. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Measure the folding joint and base angle before reusable trim is transferred to confirm the supplied mirror side. Measure the door-side bolt pattern during incoming-part comparison so the original fasteners align correctly. Match the door-side bolt pattern before body-color work begins so the base seats without distortion. Verify production year, trim equipment and left-right orientation because similar housings can use different wiring.
Electrical and Housing Checks
Test the harness exit direction before the inner door panel is refitted so manual and electrical variants stay separated. Inspect the requested functional scope before the inner door panel is refitted to prevent a connector mismatch. Check the requested functional scope before the old mirror is disconnected so manual and electrical variants stay separated. The listed feature reference is power adjustment, integrated signal lamp; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87610-1R340 |
| Cross-reference numbers | 87610-1R340 |
| Internal item code | HY02014-043 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2011 |
| Installation position | Left exterior mirror position |
| Listed mirror features | power adjustment, integrated signal lamp |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Assess the painted or unpainted cover with transit packaging retained before a distorted base is fitted. Confirm the mirror adjustment plate after unpacking but before installation to keep the correct SKU traceable. Examine the mounting studs without placing weight on the glass so cracked glass is found immediately. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
State the destination country with the target delivery timing before shipping cost is calculated. Separate the adjustment and lamp requirements on repeat distributor orders so lead time can be reviewed correctly. Provide the sample or bulk-order requirement with the target delivery timing so similar mirror housings remain separated. Identify body-colour finishing needs separately from the mechanical and electrical mirror specification.
Frequently Asked Questions
How should 87610-1R340 be handled during installation?
Review the signal lens without placing weight on the glass to identify transit damage. Avoid supporting the assembly by the glass or forcing the folding joint.
Is 87610-1R340 a left or right side mirror?
87610-1R340 is recorded for the left exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87610-1R340 include every electrical function?
The listed feature reference is power adjustment, integrated signal lamp. Only the identified product line is supplied unless additional mirror caps or hardware are agreed separately.
Should 87610-1R340 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87610-1R340 fitment be confirmed?
Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins. The complete OE reference and left exterior mirror position should agree before installation.
