87610-1R000 Left Exterior Side Mirror Assembly for HYUNDAI Accent 2011
Primary OE reference: 87610-1R000
Cross-reference 1: 87610-1R000
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Accent 2011
Installation position: Left exterior mirror position
Brand: HYUNDAI
Model: Accent
Vehicle year: 2011
Listed mirror features: manual adjustment
Mirror function: Provides the intended viewing angle beside the cabin for the stated production year and model to match the vehicle-specific housing outline.
Mounting comparison: Match the left-right orientation before body-color work begins to avoid a trim-level mismatch.
Electrical review: Review the plug keying and latch while the original unit is still available to identify missing or damaged wiring early.
Fitment confirmation: A connector-side photograph and the retained mirror provide the strongest comparison for this application.
Supplied component scope: The images define the supplied housing, glass and visible hardware, while vehicle-side wiring remains on the vehicle.
Receiving priority: Confirm the connector terminals before the packaging is discarded so cracked glass is found immediately.
Handling note: Support the mounting studs before the component enters workshop stock to identify transit damage.
Wholesale enquiry: Include HY02014-045 on repeat orders so the requested application remains traceable.
Order preparation: Separate the original-mirror photograph before production scheduling to make repeat ordering more reliable.
Internal item code: HY02014-045
87610-1R000 Exterior Side Mirror Assembly Product Overview
87610-1R000 identifies an exterior side mirror assembly for the left exterior mirror position on HYUNDAI Accent 2011. Completes the factory-style exterior observation point with the left or right position clearly separated before trim and wiring are reassembled. The page records HY02014-045 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Recovers the vehicle’s original rearward observation area without treating a similar housing as universal to reduce incorrect left-right ordering. Restores the passenger-side exterior sightline after the removed part has been identified to match the vehicle-specific housing outline. Completes the passenger-side exterior sightline for repair stock tied to the listed OE reference to reduce incorrect left-right ordering. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Compare the manual cable or electrical controls with the vehicle year identified before the part enters installation work. Photograph the triangular mounting base before body-color work begins to separate facelift variations. Review the wiring lead and plug position using the VIN when year boundaries overlap so the original fasteners align correctly. Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Electrical and Housing Checks
Trace the manual control cable before the inner door panel is refitted so manual and electrical variants stay separated. Inspect the lamp lens and terminals before the inner door panel is refitted to identify missing or damaged wiring early. Separate the adjustment control type during bench comparison to prevent a connector mismatch. The listed feature reference is manual adjustment; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87610-1R000 |
| Cross-reference numbers | 87610-1R000 |
| Internal item code | HY02014-045 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2011 |
| Installation position | Left exterior mirror position |
| Listed mirror features | manual adjustment |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Examine the painted or unpainted cover without placing weight on the glass so connector damage is isolated early. Support the mounting studs against the approved reference before the part is accepted into inventory. Inspect the mirror glass after unpacking but before installation to protect the visible exterior surface. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Record the destination country before carton planning to keep the OE identity traceable. List the original-mirror photograph before production scheduling so the supplied component scope is clear. Identify the required mirror side on the wholesale enquiry so similar mirror housings remain separated. Record the complete OE number on every purchase line to avoid mixing similar exterior mirrors.
Frequently Asked Questions
Should 87610-1R000 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87610-1R000 fitment be confirmed?
Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins. The complete OE reference and left exterior mirror position should agree before installation.
What should be checked when 87610-1R000 arrives?
Assess the purchase-line label before the packaging is discarded so cracked glass is found immediately. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 87610-1R000?
Attach a connector photo if powered functions or lamp equipment must match the vehicle harness. Connector and rear-mount photographs help separate close variants.
What is supplied with 87610-1R000?
Painted appearance in a photograph does not replace verification of the required housing and electrical content. Use the product photographs and written quotation to confirm the final sales scope.
