87610-1E050 Left Exterior Side Mirror Assembly for HYUNDAI Accent 2006
Primary OE reference: 87610-1E050
Cross-reference 1: 87610-1E050
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Accent 2006
Installation position: Left exterior mirror position
Brand: HYUNDAI
Model: Accent
Vehicle year: 2006
Listed mirror features: power adjustment
Mirror function: Returns the outside viewing surface and housing for the stated production year and model to match the vehicle-specific housing outline.
Mounting comparison: Inspect the cover contour and lower edge with the existing harness accessible to prevent an incorrect housing selection.
Electrical review: Protect the requested functional scope after transit restraints are removed before final fitment approval.
Fitment confirmation: Use 87610-1E050 as the purchasing reference, then compare the left exterior mirror position with the removed component.
Supplied component scope: Confirm adjustment, lamp and folding requirements in writing when those functions are essential to the repair.
Receiving priority: Inspect the edge seals and clips before the packaging is discarded to protect the visible exterior surface.
Handling note: Support the edge seals and clips before electrical testing begins so connector damage is isolated early.
Wholesale enquiry: Send the OE reference, model year, mirror side, quantity and destination for a wholesale quotation.
Order preparation: Include the destination country with the target delivery timing to keep the OE identity traceable.
Internal item code: HY02014-041
87610-1E050 Exterior Side Mirror Assembly Product Overview
87610-1E050 identifies an exterior side mirror assembly for the left exterior mirror position on HYUNDAI Accent 2006. Returns the passenger-side exterior sightline without treating a similar housing as universal so the correct side remains easy to verify. The page records HY02014-041 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Provides the exterior mirror mounting envelope after collision, housing or glass damage while preserving the listed fitment identity. Maintains the mirror base and visible rearward field during a side-mirror replacement project before paint or finishing work is scheduled. Returns the outside viewing surface and housing within the application-specific door geometry to reduce incorrect left-right ordering. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Confirm the complete OE label at the exact door position so the base seats without distortion. Record the production-date application before reusable trim is transferred to avoid a trim-level mismatch. Cross-check the cover contour and lower edge with the existing harness accessible so the original fasteners align correctly. Use 87610-1E050 as the purchasing reference, then compare the left exterior mirror position with the removed component.
Electrical and Housing Checks
Verify the adjustment control type using the application notes and physical sample before the workshop schedules installation. Review the harness exit direction before optional functions are promised so lamp and adjustment requirements are clear. Review the plug keying and latch after transit restraints are removed so manual and electrical variants stay separated. The listed feature reference is power adjustment; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87610-1E050 |
| Cross-reference numbers | 87610-1E050 |
| Internal item code | HY02014-041 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2006 |
| Installation position | Left exterior mirror position |
| Listed mirror features | power adjustment |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Inspect the purchase-line label at warehouse receiving to protect the visible exterior surface. Isolate the signal lens before electrical testing begins to protect the visible exterior surface. Support the connector terminals under neutral receiving light so connector damage is isolated early. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Reference the adjustment and lamp requirements on repeat distributor orders to support an accurate B2B quotation. Specify the sample or bulk-order requirement when mixed-model stock is required before shipping cost is calculated. Specify the adjustment and lamp requirements when left and right units are combined so lead time can be reviewed correctly. Confirm the destination country and preferred transport method before export pricing is prepared.
Frequently Asked Questions
How should 87610-1E050 be handled during installation?
Check the purchase-line label after unpacking but before installation so left and right mirrors remain separated. Avoid supporting the assembly by the glass or forcing the folding joint.
Is 87610-1E050 a left or right side mirror?
87610-1E050 is recorded for the left exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87610-1E050 include every electrical function?
The listed feature reference is power adjustment. Review every saved photograph to confirm the visible glass, housing, base and connector scope before purchase approval.
Should 87610-1E050 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87610-1E050 fitment be confirmed?
A connector-side photograph and the retained mirror provide the strongest comparison for this application. The complete OE reference and left exterior mirror position should agree before installation.
