8710326060 Blower Motor for HONDA
Primary OE reference: 8710326060
Cross-reference 1: 871030K110
Cross-reference 2: 871030K070
Cross-reference 3: 79310TF0003
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA
Brand: HONDA
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
8710326060 Automotive Blower Motor Overview
This listing links 8710326060 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6207-078, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6207-078 when comparing this 8710326060 airflow configuration.
OE Reference and Application
The primary catalogue number is 8710326060. The recorded application is HONDA. For 6207-078, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6207-078 with the approved OE reference.
HVAC Interface and 8710326060 installation
During work on 6207-078, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 8710326060 installation. Recheck 6207-078 before the lower trim is closed.
For item 6207-078, confirm that the 8710326060 centrifugal wheel clears its housing and that the 6207-078 connector lock engages without force. After seating 6207-078, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-078.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 8710326060 |
| Cross-reference numbers | 871030K110 / 871030K070 / 79310TF0003 |
| Vehicle brand | HONDA |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 8710326060 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-078, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6207-078 record remains the picking reference.
For trade item 6207-078, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6207-078 on the packing instruction.
Frequently Asked Questions
How should item 6207-078 and blower number 8710326060 be verified?
Match 6207-078 to the complete 8710326060 marking, then compare the 6207-078 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-078 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-078; confirm steering position, climate-control specification and the original 6207-078 geometry before approval.
What circuit checks are useful when 6207-078 does not operate?
For 6207-078, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-078 motor again.
Which details should accompany a wholesale request for 6207-078?
Provide item 6207-078, OE 8710326060, the stated application, quantity and destination; add 6207-078 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-078?
Clear debris from the air inlet, check that the 6207-078 wheel turns freely, seat the 6207-078 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-078: Send 8710326060, the 6207-078 application and required quantity for a fitment and supply review.
