8710312040 Blower Motor for TOYOTA Corolla
Primary OE reference: 8710312040
Cross-reference 1: 8710326020
Cross-reference 2: 700055
Cross-reference 3: 34135
Cross-reference 4: 5360001
Product type: Automotive HVAC Blower Motor
Applicable vehicle: TOYOTA Corolla
Brand: TOYOTA
Model: Corolla
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
8710312040 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 8710312040 together with the 8710312040 product images and vehicle data on this page.
For catalogue item 6210-072, the 8710312040 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6210-072 when comparing this 8710312040 airflow configuration.
OE Reference and Application
The primary catalogue number is 8710312040. The recorded application is TOYOTA Corolla. For 6210-072, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6210-072 with the approved OE reference.
HVAC Interface and 8710312040 installation
During work on 6210-072, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6210-072 before the lower trim is closed.
For item 6210-072, confirm that the 8710312040 centrifugal wheel clears its housing and that the 6210-072 connector lock engages without force. After seating 6210-072, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-072.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 8710312040 |
| Cross-reference numbers | 8710326020 / 700055 / 34135 / 5360001 |
| Vehicle brand | TOYOTA |
| Vehicle model | Corolla |
| Model year | Confirm by OE reference |
| 8710312040 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6210-072, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6210-072 record remains the picking reference.
For trade item 6210-072, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6210-072 on the packing instruction.
Frequently Asked Questions
How should item 6210-072 and blower number 8710312040 be verified?
Match 6210-072 to the complete 8710312040 marking, then compare the 6210-072 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.
Can 6210-072 have more than one vehicle-side blower configuration?
Yes. TOYOTA production changes can affect 6210-072; confirm steering position, climate-control specification and the original 6210-072 geometry before approval.
What circuit checks are useful when 6210-072 does not operate?
For 6210-072, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-072 motor again.
Which details should accompany a wholesale request for 6210-072?
Provide item 6210-072, OE 8710312040, the stated application, quantity and destination; add 6210-072 carton or private-label requirements separately.
How can noise be avoided after fitting 6210-072?
Clear debris from the air inlet, check that the 6210-072 wheel turns freely, seat the 6210-072 flange evenly and keep wiring away from the impeller.
Request a quote for 6210-072: Send 8710312040, the 6210-072 application and required quantity for a fitment and supply review.
