87103-33050 Blower Motor for LEXUS ES 300 2000
Primary OE reference: 87103-33050
Cross-reference 1: 87103-YC050
Cross-reference 2: TYC700028
Cross-reference 3: PM9179
Cross-reference 4: 35364
Product type: Automotive HVAC Blower Motor
Applicable vehicle: LEXUS ES 300 2000
Brand: LEXUS
Model: ES 300
Vehicle year: 2000
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
87103-33050 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference 87103-33050 for application-led sourcing.
For catalogue item 6210-035, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6210-035 when comparing this 87103-33050 airflow configuration.
OE Reference and Application
The primary catalogue number is 87103-33050. The recorded application is LEXUS ES 300 2000. For 6210-035, Measure the 87103-33050 wheel height and outer diameter, then compare the electrical socket and base contour with the 87103-33050 product photos. Record 6210-035 with the approved OE reference.
HVAC Interface and 87103-33050 installation
During work on 6210-035, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 87103-33050 installation. Recheck 6210-035 before the lower trim is closed.
For item 6210-035, confirm that the 87103-33050 centrifugal wheel clears its housing and that the 6210-035 connector lock engages without force. After seating 6210-035, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-035.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 87103-33050 |
| Cross-reference numbers | 87103-YC050 / TYC700028 / PM9179 / 35364 |
| Vehicle brand | LEXUS |
| Vehicle model | ES 300 |
| Model year | 2000 |
| 87103-33050 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6210-035, Packing preparation accounts for the 87103-33050 motor weight and wheel shape to reduce movement inside the carton. The 6210-035 record remains the picking reference.
For trade item 6210-035, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6210-035 on the packing instruction.
Frequently Asked Questions
How should item 6210-035 and blower number 87103-33050 be verified?
Match 6210-035 to the complete 87103-33050 marking, then compare the 6210-035 plug, terminal count, mounting flange and wheel dimensions with the removed LEXUS unit.
Can 6210-035 have more than one vehicle-side blower configuration?
Yes. LEXUS production changes can affect 6210-035; confirm steering position, climate-control specification and the original 6210-035 geometry before approval.
What circuit checks are useful when 6210-035 does not operate?
For 6210-035, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-035 motor again.
Which details should accompany a wholesale request for 6210-035?
Provide item 6210-035, OE 87103-33050, the stated application, quantity and destination; add 6210-035 carton or private-label requirements separately.
How can noise be avoided after fitting 6210-035?
Clear debris from the air inlet, check that the 6210-035 wheel turns freely, seat the 6210-035 flange evenly and keep wiring away from the impeller.
Request a quote for 6210-035: Send 87103-33050, the 6210-035 application and required quantity for a fitment and supply review.
