87103-0K200 Blower Motor for TOYOTA Hilux
Primary OE reference: 87103-0K200
Cross-reference 1: 87103-26070
Cross-reference 2: 87103-0K060
Cross-reference 3: 87103-26081
Cross-reference 4: 87103-26072
Cross-reference 5: 272700-0720
Product type: Automotive HVAC Blower Motor
Applicable vehicle: TOYOTA Hilux
Brand: TOYOTA
Model: Hilux
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
87103-0K200 Automotive Blower Motor Overview
This listing links 87103-0K200 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6210-023, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6210-023 when comparing this 87103-0K200 airflow configuration.
OE Reference and Application
The primary catalogue number is 87103-0K200. The recorded application is TOYOTA Hilux. For 6210-023, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6210-023 with the approved OE reference.
HVAC Interface and 87103-0K200 installation
During work on 6210-023, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 87103-0K200 installation. Recheck 6210-023 before the lower trim is closed.
For item 6210-023, confirm that the 87103-0K200 centrifugal wheel clears its housing and that the 6210-023 connector lock engages without force. After seating 6210-023, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-023.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 87103-0K200 |
| Cross-reference numbers | 87103-26070 / 87103-0K060 / 87103-26081 / 87103-26072 / 272700-0720 |
| Vehicle brand | TOYOTA |
| Vehicle model | Hilux |
| Model year | Confirm by OE reference |
| 87103-0K200 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6210-023, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6210-023 record remains the picking reference.
For trade item 6210-023, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6210-023 on the packing instruction.
Frequently Asked Questions
How should item 6210-023 and blower number 87103-0K200 be verified?
Match 6210-023 to the complete 87103-0K200 marking, then compare the 6210-023 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.
Can 6210-023 have more than one vehicle-side blower configuration?
Yes. TOYOTA production changes can affect 6210-023; confirm steering position, climate-control specification and the original 6210-023 geometry before approval.
What circuit checks are useful when 6210-023 does not operate?
For 6210-023, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-023 motor again.
Which details should accompany a wholesale request for 6210-023?
Provide item 6210-023, OE 87103-0K200, the stated application, quantity and destination; add 6210-023 carton or private-label requirements separately.
How can noise be avoided after fitting 6210-023?
Clear debris from the air inlet, check that the 6210-023 wheel turns freely, seat the 6210-023 flange evenly and keep wiring away from the impeller.
Request a quote for 6210-023: Send 87103-0K200, the 6210-023 application and required quantity for a fitment and supply review.
