87103-0D040 Blower Motor for TOYOTA Vios 2003-2007
Primary OE reference: 87103-0D040
Product type: Automotive HVAC Blower Motor
Applicable vehicle: TOYOTA Vios 2003-2007
Brand: TOYOTA
Model: Vios
Vehicle year: 2003-2007
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
87103-0D040 Automotive Blower Motor Overview
Reference 87103-0D040 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6210-007, the 87103-0D040 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6210-007 when comparing this 87103-0D040 airflow configuration.
OE Reference and Application
The primary catalogue number is 87103-0D040. The recorded application is TOYOTA Vios 2003-2007. For 6210-007, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6210-007 with the approved OE reference.
HVAC Interface and 87103-0D040 installation
During work on 6210-007, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6210-007 before the lower trim is closed.
For item 6210-007, confirm that the 87103-0D040 centrifugal wheel clears its housing and that the 6210-007 connector lock engages without force. After seating 6210-007, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-007.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 87103-0D040 |
| Cross-reference numbers | 87103-0D040 |
| Vehicle brand | TOYOTA |
| Vehicle model | Vios |
| Model year | 2003-2007 |
| 87103-0D040 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6210-007, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6210-007 record remains the picking reference.
For trade item 6210-007, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6210-007 on the packing instruction.
Frequently Asked Questions
How should item 6210-007 and blower number 87103-0D040 be verified?
Match 6210-007 to the complete 87103-0D040 marking, then compare the 6210-007 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.
Can 6210-007 have more than one vehicle-side blower configuration?
Yes. TOYOTA production changes can affect 6210-007; confirm steering position, climate-control specification and the original 6210-007 geometry before approval.
What circuit checks are useful when 6210-007 does not operate?
For 6210-007, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-007 motor again.
Which details should accompany a wholesale request for 6210-007?
Provide item 6210-007, OE 87103-0D040, the stated application, quantity and destination; add 6210-007 carton or private-label requirements separately.
How can noise be avoided after fitting 6210-007?
Clear debris from the air inlet, check that the 6210-007 wheel turns freely, seat the 6210-007 flange evenly and keep wiring away from the impeller.
Request a quote for 6210-007: Send 87103-0D040, the 6210-007 application and required quantity for a fitment and supply review.
