86841-1M000 Rear Left Mudguard for KIA Cerato TD 2009-2016
Primary OE reference: 86841-1M000
Cross-reference 1: 86841-1M000
Product type: Rear Left Mudguard
Applicable vehicle: KIA Cerato TD 2009-2016
Installation position: Rear Left wheel-arch splash protection position
Brand: KIA
Model: Cerato
Vehicle year: 2009-2016
Protective role: reduces water, mud and loose-stone discharge behind the rear wheel while shielding adjacent lower body surfaces
Fitment confirmation: Match the internal SKU to the OE number on the purchase line for 86841-1M000; Market-specific body trim can affect the final edge alignment.
Physical comparison: Align the upper locating points before comparing the trailing edge; because a similar photograph does not prove identical fastening geometry.
Supply scope: The offered item follows the image set and OE reference; bumper trim, arch mouldings and fasteners remain outside the standard scope.
Receiving focus: Lay the guard on a flat protected surface and review its moulded shape for KA02017-011; Quantity control is especially important when front and rear guards are ordered together.
Purchase preparation: Reference the OE identity on every wholesale enquiry line; Clear wheel-position wording prevents left-right assumptions during packing.
86841-1M000 Rear Left Mudguard Product Overview
The photographed splash-control part is catalogued for KIA Cerato TD 2009-2016. It reduces water, mud and loose-stone discharge behind the rear wheel while shielding adjacent lower body surfaces. A model name alone cannot confirm fitment when production changes alter hole spacing.
Position-Specific Mud Flap Function
Inspect the full profile, fastener spacing and bumper-side transition on 86841-1M000 for the rear left wheel-arch splash protection position, because left and right parts can share dimensions but not mounting direction.
Vehicle and OE Fitment Confirmation
Confirm the original OE marking and recorded vehicle year for KIA Cerato TD 2009-2016 and the source application "09-16款 赛拉图/福瑞迪 TD 挡泥板 后左". OE identity provides a stronger purchasing reference than a generic mud-flap shape.
Product Technical Specifications
| Product type | Rear Left Mudguard |
|---|---|
| Primary OE reference | 86841-1M000 |
| Internal item code | KA02017-011 |
| Vehicle brand | KIA |
| Model | Cerato |
| Vehicle year | 2009-2016 |
| Installation position | Rear Left wheel-arch splash protection position |
| Applicable vehicle | KIA Cerato TD 2009-2016 |
| Cross-reference numbers | 86841-1M000 |
Incoming Quality Review for the Mudguard
Inspect the outer face for pressure marks and edge deformation when 86841-1M000 arrives under item code KA02017-011. Early orientation checks keep opposite-side parts from entering the wrong job.
Wholesale Ordering Information
Send the OE number, vehicle year, model and required side when requesting 86841-1M000 for KIA Cerato TD 2009-2016. Quantity and destination information support suitable carton planning.
Frequently Asked Questions
How can I confirm 86841-1M000 matches my vehicle?
Confirm the OE number, axle, side, production year and mounting layout against the removed part before ordering.
Which physical details should be compared on 86841-1M000?
Review the visible contour along with the concealed mounting flange. to keep the splash lip in the intended airflow and debris path.
What is included with the 86841-1M000 mudguard supply?
The product scope is limited to the moulded mudguard shown. Workshop consumables and attachment clips are not automatically bundled.
What should be checked when 86841-1M000 is delivered?
Review packaging condition before accepting a visibly distorted part. Flexible guards can hold a temporary bend if packed under load.
What information is needed to quote 86841-1M000?
Specify whether the order is for one wheel position or matched sides for KA02017-011. Packaging instructions can be matched to the product’s flexible moulded shape.
