86569-B4400 Front Bumper Grille for HYUNDAI i10 2014
OE lookup: 86569-B4400 as the primary lookup number
Catalogue code: HY02004-043 for quotation and order tracking
Make: HYUNDAI
Model line: i10 (2014)
Fitment record: 2014 HYUNDAI i10 (plated-finish version); verify by VIN and original part
Mounting area: Front bumper area
Reference numbers:
86569-B4400
Fitment check: Review market, trim and attachment points together with 86569-B4400
Purchase note: Request sample, lot quantity, destination and packing terms in the enquiry
Item-specific review: 86569-B4400 on i10 uses HY02004-043 as the controlled front-bumper line; compare i10 frame contour, 86569-B4400 mesh geometry and HY02004-043 attachment direction
Approval record: HY02004-043 should link the 2014 HYUNDAI i10 (plated-finish version) vehicle evidence to 86569-B4400; retain i10 opening photos and front grille measurements with the buyer decision
Component: Front Bumper Grille for 2014 HYUNDAI i10
86569-B4400 Front Bumper Grille Product Overview
Reference 86569-B4400 connects the pictured front bumper grille to 2014 HYUNDAI i10 (plated-finish version). Its internal line code, HY02004-043, should remain on the enquiry so vehicle evidence and commercial details stay attached to the same part.
i10 Bumper Grille Function and Position
This is a non-structural front bumper component for the i10. The front bumper grille contributes to front- or rear-fascia finish and can differ after a facelift even when the vehicle badge stays unchanged. Catalogue version: plated-finish version.
The source application is recorded as 14款 I10 前杠格栅(电镀款). This retained catalogue wording helps trace market, trim and body-style distinctions during buyer verification.
Workshop Handling and Installation Review
Before fitting HY02004-043, clean the front aperture and compare all retained hardware. On the i10, verify that each tab enters its intended slot and that no edge is held under permanent stress.
Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.
OE-Led Fitment Verification for 86569-B4400
Use 86569-B4400 as the first filter and vehicle production data as the second. A trim or facelift change can make HY02004-043 unsuitable even where 2014 HYUNDAI i10 (plated-finish version) appears broadly similar.
Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.
Inspection, Packaging and Receiving Control
The 86569-B4400 part benefits from a sample-based inspection plan: confirm identity, geometry and visible finish first, then monitor HY02004-043 lot packing so long edges are not flexed during transport.
For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.
Product-Specific Approval Record for 86569-B4400
The following review points belong to HY02004-043 and the stated 2014 HYUNDAI i10 (plated-finish version) application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.
- Receiving record 1 — HY02004-043 / Front: record the mesh orientation alongside the vehicle production label for i10 item HY02004-043 under OE reference 86569-B4400.
- Fitment file 2 — 2014 HYUNDAI i10 (plated-finish version) / HY02004-043: mark lamp or trim interfaces on the buyer approval photograph for i10 item HY02004-043 under OE reference 86569-B4400.
- Geometry control 3 — 86569-B4400 / HY02004-043: note surface texture under neutral lighting before installation for i10 item HY02004-043 under OE reference 86569-B4400.
- Sample decision 4 — i10 / 86569-B4400: link receiving photographs to the commercial order-line number for i10 item HY02004-043 under OE reference 86569-B4400.
- Order trace 5 — HY02004-043 / Front: record any market-specific openings shown on the original bumper for i10 item HY02004-043 under OE reference 86569-B4400.
- Vehicle evidence 6 — 2014 HYUNDAI i10 (plated-finish version) / HY02004-043: match the grille outline to the stated body style and facelift for i10 item HY02004-043 under OE reference 86569-B4400.
- Catalogue proof 7 — 86569-B4400 / HY02004-043: measure the outer frame before comparing the retained bumper aperture for i10 item HY02004-043 under OE reference 86569-B4400.
- Packing control 8 — i10 / 86569-B4400: check the centre section against the bumper cover reference points for i10 item HY02004-043 under OE reference 86569-B4400.
- Identity gate 9 — HY02004-043 / Front: confirm the lower edge follows the original underbody connection for i10 item HY02004-043 under OE reference 86569-B4400.
- Workshop checkpoint 10 — 2014 HYUNDAI i10 (plated-finish version) / HY02004-043: verify left and right orientation from the vehicle-facing side for i10 item HY02004-043 under OE reference 86569-B4400.
- Receiving record 11 — 86569-B4400 / HY02004-043: check transport support around projecting corners and narrow bridges for i10 item HY02004-043 under OE reference 86569-B4400.
- Fitment file 12 — i10 / 86569-B4400: confirm transferred covers or badges fit without altering the frame for i10 item HY02004-043 under OE reference 86569-B4400.
- Geometry control 13 — HY02004-043 / Front: keep the production-date evidence beside the approved OE lookup for i10 item HY02004-043 under OE reference 86569-B4400.
- Sample decision 14 — 2014 HYUNDAI i10 (plated-finish version) / HY02004-043: photograph every locator before the damaged grille leaves the workshop for i10 item HY02004-043 under OE reference 86569-B4400.
- Order trace 15 — 86569-B4400 / HY02004-043: inspect side returns for the same depth and fastening direction for i10 item HY02004-043 under OE reference 86569-B4400.
Application Evidence Narrative for HY02004-043
Reference 86569-B4400 connects the pictured front bumper grille to 2014 HYUNDAI i10 (plated-finish version). Its internal line code, HY02004-043, should remain on the enquiry so vehicle evidence and commercial details stay attached to the same part.
The front bumper grille forms part of the i10 bumper assembly rather than a universal mesh insert. Its service role is to restore the correct opening, surrounding body line and attachment interface. Variant information: plated-finish version.
For the bumper grille line identified by HY02004-043, the principal OE reference is 86569-B4400. It is listed for 2014 HYUNDAI i10 (plated-finish version) and should be approved from the number, vehicle details and physical mounting pattern together.
On the i10, this front grille element closes a model-shaped aperture while permitting the designed air passage. Clip direction, outer contour and adjacent mouldings matter as much as the overall outline. Recorded configuration: plated-finish version.
This page documents 86569-B4400, a front bumper grille associated with 2014 HYUNDAI i10 (plated-finish version). Rather than treating grille parts as universal, the listing keeps internal reference HY02004-043 and the stated application visible for technical review.
The listed grille belongs to the front bumper stack of the i10. Its geometry can affect panel gaps, adjacent trim seating and the clear air-entry area. Supply reference: plated-finish version.
The identity chain for HY02004-043 is HYUNDAI i10, 2014, front bumper position and OE 86569-B4400. Keep HY02004-043 beside i10 vehicle evidence, keep 86569-B4400 beside the removed grille marking, and keep the front location beside the approval photographs.
86569-B4400 Front Bumper Grille for HYUNDAI i10 2014 is the controlled search entity for this page. In a buyer file, 86569-B4400 should lead the i10 comparison, HY02004-043 should lead the supplier trace, and 2014 HYUNDAI i10 (plated-finish version) should lead the vehicle-side confirmation before shipment.
Product Technical Specifications
| Product type | Front Bumper Grille |
|---|---|
| Primary OE reference | 86569-B4400 |
| Cross-reference numbers | 86569-B4400 |
| Internal item code | HY02004-043 |
| Vehicle brand | HYUNDAI |
| Vehicle model | i10 |
| Model year | 2014 |
| Installation position | Front bumper area |
| Applicable vehicle | 2014 HYUNDAI i10 (plated-finish version) |
Wholesale Procurement for HY02004-043
Procurement approval works best when 86569-B4400, HY02004-043 and 2014 HYUNDAI i10 (plated-finish version) remain together from enquiry through receiving. Note destination and inspection expectations before the commercial offer is finalised.
Buyers seeking 86569-B4400 may request a technical review with vehicle details and original-part photographs before confirming commercial terms.
Frequently Asked Questions
What vehicle information helps verify HY02004-043?
Provide the VIN, production date, market, trim, body style and photos of the removed part. The recorded application is 2014 HYUNDAI i10 (plated-finish version).
What does 86569-B4400 identify?
86569-B4400 is the primary reference recorded for this front bumper grille and 2014 HYUNDAI i10 (plated-finish version). It should be checked against the original part and vehicle data.
How should fitment for 86569-B4400 be approved?
Confirm 2014 HYUNDAI i10 (plated-finish version), VIN or build date, original OE marking, bumper opening and tab layout. Keep internal code HY02004-043 on the review record.
What should be included in a wholesale enquiry for 86569-B4400?
Send 86569-B4400, item HY02004-043, vehicle details, quantity, destination and any sample, packaging, label or inspection requirements.
Should installers compare the original i10 grille with HY02004-043?
Yes. Review edge profile, mesh design, fastening points, openings and neighbouring trim before forcing any clips into place.
Request a Product and Fitment Review
Send the complete OE reference 86569-B4400, item code HY02004-043, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.
