86561-4Z500 Front Bumper Grille for HYUNDAI Santa Fe 2016
Internal reference: HY02004-030 for quotation and order tracking
Automotive brand: HYUNDAI
Nameplate: Santa Fe (2016)
Vehicle use: 2016 HYUNDAI Santa Fe; verify by VIN and original part
Fitting position: Front bumper area
OE comparisons:
86561-4Z500
Approval step: Approve HY02004-030 only after OE and physical-shape checks agree
Wholesale detail: Request sample, lot quantity, destination and packing terms in the enquiry
Item-specific review: 86561-4Z500 on Santa Fe uses HY02004-030 as the controlled front-bumper line; compare Santa Fe frame contour, 86561-4Z500 mesh geometry and HY02004-030 attachment direction
Approval record: HY02004-030 should link the 2016 HYUNDAI Santa Fe vehicle evidence to 86561-4Z500; retain Santa Fe opening photos and front grille measurements with the buyer decision
Part identity: Front Bumper Grille for 2016 HYUNDAI Santa Fe
Main reference: 86561-4Z500 as the primary lookup number
86561-4Z500 Front Bumper Grille Product Overview
86561-4Z500 identifies this front bumper grille for 2016 HYUNDAI Santa Fe. The record links OE-led search intent with supplier code HY02004-030, a precise vehicle reference and the photographs saved with the source item.
Santa Fe Bumper Grille Function and Position
This front bumper grille fills a designated front bumper opening on the Santa Fe. It supports an orderly repair by matching the surrounding fascia instead of relying on a cut-to-fit grille solution.
For this line, the workbook application reads 16款 圣达菲 前杠格栅. It is included as traceable source evidence alongside the normalized English vehicle entity.
OE-Led Fitment Verification for 86561-4Z500
Use 86561-4Z500 as the first filter and vehicle production data as the second. A trim or facelift change can make HY02004-030 unsuitable even where 2016 HYUNDAI Santa Fe appears broadly similar.
Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.
Workshop Handling and Installation Review
Support the Santa Fe bumper cover while releasing the original front grille. For HY02004-030, align locating points first, confirm an even perimeter gap and only then lock the remaining clips.
Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.
Inspection, Packaging and Receiving Control
The 86561-4Z500 part benefits from a sample-based inspection plan: confirm identity, geometry and visible finish first, then monitor HY02004-030 lot packing so long edges are not flexed during transport.
For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.
Product-Specific Approval Record for 86561-4Z500
The following review points belong to HY02004-030 and the stated 2016 HYUNDAI Santa Fe application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.
- Geometry control 1 — HY02004-030 / Front: record any market-specific openings shown on the original bumper for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Sample decision 2 — 2016 HYUNDAI Santa Fe / HY02004-030: match the grille outline to the stated body style and facelift for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Order trace 3 — 86561-4Z500 / HY02004-030: measure the outer frame before comparing the retained bumper aperture for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Vehicle evidence 4 — Santa Fe / 86561-4Z500: check the centre section against the bumper cover reference points for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Catalogue proof 5 — HY02004-030 / Front: confirm the lower edge follows the original underbody connection for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Packing control 6 — 2016 HYUNDAI Santa Fe / HY02004-030: verify left and right orientation from the vehicle-facing side for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Identity gate 7 — 86561-4Z500 / HY02004-030: check transport support around projecting corners and narrow bridges for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Workshop checkpoint 8 — Santa Fe / 86561-4Z500: confirm transferred covers or badges fit without altering the frame for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Receiving record 9 — HY02004-030 / Front: keep the production-date evidence beside the approved OE lookup for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Fitment file 10 — 2016 HYUNDAI Santa Fe / HY02004-030: photograph every locator before the damaged grille leaves the workshop for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Geometry control 11 — 86561-4Z500 / HY02004-030: inspect side returns for the same depth and fastening direction for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Sample decision 12 — Santa Fe / 86561-4Z500: compare clip spacing without bending the replacement grille for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Order trace 13 — HY02004-030 / Front: retain a signed control sample for repeat purchasing decisions for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Vehicle evidence 14 — 2016 HYUNDAI Santa Fe / HY02004-030: compare adjacent moulding gaps before locking the centre clips for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
- Catalogue proof 15 — 86561-4Z500 / HY02004-030: inspect mounting slots for collision distortion before trial fitting for Santa Fe item HY02004-030 under OE reference 86561-4Z500.
Application Evidence Narrative for HY02004-030
This application-led listing presents 86561-4Z500 as a front bumper grille for 2016 HYUNDAI Santa Fe. Item HY02004-030 is intended for OE-number comparison, not shape-only selection.
This is a non-structural front bumper component for the Santa Fe. The front bumper grille contributes to front- or rear-fascia finish and can differ after a facelift even when the vehicle badge stays unchanged.
86561-4Z500 identifies this front bumper grille for 2016 HYUNDAI Santa Fe. The record links OE-led search intent with supplier code HY02004-030, a precise vehicle reference and the photographs saved with the source item.
The listed grille belongs to the front bumper stack of the Santa Fe. Its geometry can affect panel gaps, adjacent trim seating and the clear air-entry area.
Reference 86561-4Z500 connects the pictured front bumper grille to 2016 HYUNDAI Santa Fe. Its internal line code, HY02004-030, should remain on the enquiry so vehicle evidence and commercial details stay attached to the same part.
This is a non-structural front bumper component for the Santa Fe. The front bumper grille contributes to front- or rear-fascia finish and can differ after a facelift even when the vehicle badge stays unchanged.
The identity chain for HY02004-030 is HYUNDAI Santa Fe, 2016, front bumper position and OE 86561-4Z500. Keep HY02004-030 beside Santa Fe vehicle evidence, keep 86561-4Z500 beside the removed grille marking, and keep the front location beside the approval photographs.
86561-4Z500 Front Bumper Grille for HYUNDAI Santa Fe 2016 is the controlled search entity for this page. In a buyer file, 86561-4Z500 should lead the Santa Fe comparison, HY02004-030 should lead the supplier trace, and 2016 HYUNDAI Santa Fe should lead the vehicle-side confirmation before shipment.
Product Technical Specifications
| Product type | Front Bumper Grille |
|---|---|
| Primary OE reference | 86561-4Z500 |
| Cross-reference numbers | 86561-4Z500 |
| Internal item code | HY02004-030 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Santa Fe |
| Model year | 2016 |
| Installation position | Front bumper area |
| Applicable vehicle | 2016 HYUNDAI Santa Fe |
Wholesale Procurement for HY02004-030
Purchasing teams can identify the line as 86561-4Z500 / HY02004-030 for 2016 HYUNDAI Santa Fe. Providing annual demand and first-order quantity helps the supplier discuss lead time, packing and freight consolidation accurately.
For repeat programmes, keep HY02004-030, the approved sample, fitment photos and packaging standard under one revision-controlled record.
Frequently Asked Questions
Should installers compare the original Santa Fe grille with HY02004-030?
Yes. Review edge profile, mesh design, fastening points, openings and neighbouring trim before forcing any clips into place.
What vehicle information helps verify HY02004-030?
Provide the VIN, production date, market, trim, body style and photos of the removed part. The recorded application is 2016 HYUNDAI Santa Fe.
What does 86561-4Z500 identify?
86561-4Z500 is the primary reference recorded for this front bumper grille and 2016 HYUNDAI Santa Fe. It should be checked against the original part and vehicle data.
How should fitment for 86561-4Z500 be approved?
Confirm 2016 HYUNDAI Santa Fe, VIN or build date, original OE marking, bumper opening and tab layout. Keep internal code HY02004-030 on the review record.
What should be included in a wholesale enquiry for 86561-4Z500?
Send 86561-4Z500, item HY02004-030, vehicle details, quantity, destination and any sample, packaging, label or inspection requirements.
Request a Product and Fitment Review
Send the complete OE reference 86561-4Z500, item code HY02004-030, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.
