86561-3S000 Front Bumper Grille for HYUNDAI Sonata 2011-2013
OE lookup: 86561-3S000 as the primary lookup number
Catalogue code: HY02004-021 for quotation and order tracking
Make: HYUNDAI
Model line: Sonata (2011-2013)
Fitment record: 2011-2013 HYUNDAI Sonata; verify by VIN and original part
Mounting area: Front bumper area
Reference numbers:
86561-3S000
Fitment check: Compare the removed grille with the saved product views before approval
Purchase note: Request sample, lot quantity, destination and packing terms in the enquiry
Item-specific review: 86561-3S000 on Sonata uses HY02004-021 as the controlled front-bumper line; compare Sonata frame contour, 86561-3S000 mesh geometry and HY02004-021 attachment direction
Approval record: HY02004-021 should link the 2011-2013 HYUNDAI Sonata vehicle evidence to 86561-3S000; retain Sonata opening photos and front grille measurements with the buyer decision
Component: Front Bumper Grille for 2011-2013 HYUNDAI Sonata
86561-3S000 Front Bumper Grille Product Overview
A sourcing check for 2011-2013 HYUNDAI Sonata can use 86561-3S000 to locate this front bumper grille. The page records HY02004-021 together with product facts that search engines, AI answer systems and professional buyers can interpret directly.
Sonata Bumper Grille Function and Position
The listed grille belongs to the front bumper stack of the Sonata. Its geometry can affect panel gaps, adjacent trim seating and the clear air-entry area.
The source application is recorded as 11-13款 索纳塔 前杠格栅. This retained catalogue wording helps trace market, trim and body-style distinctions during buyer verification.
OE-Led Fitment Verification for 86561-3S000
A correct order requires agreement between 86561-3S000, 2011-2013 HYUNDAI Sonata and the front bumper configuration. Photograph the original tabs and openings before selecting HY02004-021.
Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.
Workshop Handling and Installation Review
Before fitting HY02004-021, clean the front aperture and compare all retained hardware. On the Sonata, verify that each tab enters its intended slot and that no edge is held under permanent stress.
Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.
Inspection, Packaging and Receiving Control
The 86561-3S000 part benefits from a sample-based inspection plan: confirm identity, geometry and visible finish first, then monitor HY02004-021 lot packing so long edges are not flexed during transport.
For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.
Product-Specific Approval Record for 86561-3S000
The following review points belong to HY02004-021 and the stated 2011-2013 HYUNDAI Sonata application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.
- Receiving record 1 — 86561-3S000 / HY02004-021: check transport support around projecting corners and narrow bridges for Sonata item HY02004-021 under OE reference 86561-3S000.
- Fitment file 2 — Sonata / 86561-3S000: confirm transferred covers or badges fit without altering the frame for Sonata item HY02004-021 under OE reference 86561-3S000.
- Geometry control 3 — HY02004-021 / Front: keep the production-date evidence beside the approved OE lookup for Sonata item HY02004-021 under OE reference 86561-3S000.
- Sample decision 4 — 2011-2013 HYUNDAI Sonata / HY02004-021: photograph every locator before the damaged grille leaves the workshop for Sonata item HY02004-021 under OE reference 86561-3S000.
- Order trace 5 — 86561-3S000 / HY02004-021: inspect side returns for the same depth and fastening direction for Sonata item HY02004-021 under OE reference 86561-3S000.
- Vehicle evidence 6 — Sonata / 86561-3S000: compare clip spacing without bending the replacement grille for Sonata item HY02004-021 under OE reference 86561-3S000.
- Catalogue proof 7 — HY02004-021 / Front: retain a signed control sample for repeat purchasing decisions for Sonata item HY02004-021 under OE reference 86561-3S000.
- Packing control 8 — 2011-2013 HYUNDAI Sonata / HY02004-021: compare adjacent moulding gaps before locking the centre clips for Sonata item HY02004-021 under OE reference 86561-3S000.
- Identity gate 9 — 86561-3S000 / HY02004-021: inspect mounting slots for collision distortion before trial fitting for Sonata item HY02004-021 under OE reference 86561-3S000.
- Workshop checkpoint 10 — Sonata / 86561-3S000: verify the photographed part and physical sample share one revision for Sonata item HY02004-021 under OE reference 86561-3S000.
- Receiving record 11 — HY02004-021 / Front: record the mesh orientation alongside the vehicle production label for Sonata item HY02004-021 under OE reference 86561-3S000.
- Fitment file 12 — 2011-2013 HYUNDAI Sonata / HY02004-021: mark lamp or trim interfaces on the buyer approval photograph for Sonata item HY02004-021 under OE reference 86561-3S000.
- Geometry control 13 — 86561-3S000 / HY02004-021: note surface texture under neutral lighting before installation for Sonata item HY02004-021 under OE reference 86561-3S000.
- Sample decision 14 — Sonata / 86561-3S000: link receiving photographs to the commercial order-line number for Sonata item HY02004-021 under OE reference 86561-3S000.
- Order trace 15 — HY02004-021 / Front: record any market-specific openings shown on the original bumper for Sonata item HY02004-021 under OE reference 86561-3S000.
Application Evidence Narrative for HY02004-021
OE number 86561-3S000 is the primary lookup key for this front bumper grille used on 2011-2013 HYUNDAI Sonata. Distributors can quote item HY02004-021 while repair teams compare the original bumper opening with the supplied image record.
The front grille area is sensitive to trim and market changes. For this Sonata item, frame dimensions, mesh layout and mounting tabs must agree with the original component.
OE number 86561-3S000 is the primary lookup key for this front bumper grille used on 2011-2013 HYUNDAI Sonata. Distributors can quote item HY02004-021 while repair teams compare the original bumper opening with the supplied image record.
Mounted in the front bumper area, a front bumper grille completes a defined opening and supports the intended visual and airflow path of the Sonata. Its perimeter, mesh pattern and fastening points are vehicle-specific.
This application-led listing presents 86561-3S000 as a front bumper grille for 2011-2013 HYUNDAI Sonata. Item HY02004-021 is intended for OE-number comparison, not shape-only selection.
Within the Sonata fascia, the front bumper grille is an application-moulded exterior piece. The selected part needs the same side, opening arrangement and tab layout as the removed front grille.
The identity chain for HY02004-021 is HYUNDAI Sonata, 2011-2013, front bumper position and OE 86561-3S000. Keep HY02004-021 beside Sonata vehicle evidence, keep 86561-3S000 beside the removed grille marking, and keep the front location beside the approval photographs.
86561-3S000 Front Bumper Grille for HYUNDAI Sonata 2011-2013 is the controlled search entity for this page. In a buyer file, 86561-3S000 should lead the Sonata comparison, HY02004-021 should lead the supplier trace, and 2011-2013 HYUNDAI Sonata should lead the vehicle-side confirmation before shipment.
Product Technical Specifications
| Product type | Front Bumper Grille |
|---|---|
| Primary OE reference | 86561-3S000 |
| Cross-reference numbers | 86561-3S000 |
| Internal item code | HY02004-021 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Sonata |
| Model year | 2011-2013 |
| Installation position | Front bumper area |
| Applicable vehicle | 2011-2013 HYUNDAI Sonata |
Wholesale Procurement for HY02004-021
Procurement approval works best when 86561-3S000, HY02004-021 and 2011-2013 HYUNDAI Sonata remain together from enquiry through receiving. Note destination and inspection expectations before the commercial offer is finalised.
For repeat programmes, keep HY02004-021, the approved sample, fitment photos and packaging standard under one revision-controlled record.
Frequently Asked Questions
What vehicle information helps verify HY02004-021?
Provide the VIN, production date, market, trim, body style and photos of the removed part. The recorded application is 2011-2013 HYUNDAI Sonata.
What does 86561-3S000 identify?
86561-3S000 is the primary reference recorded for this front bumper grille and 2011-2013 HYUNDAI Sonata. It should be checked against the original part and vehicle data.
How should fitment for 86561-3S000 be approved?
Confirm 2011-2013 HYUNDAI Sonata, VIN or build date, original OE marking, bumper opening and tab layout. Keep internal code HY02004-021 on the review record.
What should be included in a wholesale enquiry for 86561-3S000?
Send 86561-3S000, item HY02004-021, vehicle details, quantity, destination and any sample, packaging, label or inspection requirements.
Should installers compare the original Sonata grille with HY02004-021?
Yes. Review edge profile, mesh design, fastening points, openings and neighbouring trim before forcing any clips into place.
Request a Product and Fitment Review
Send the complete OE reference 86561-3S000, item code HY02004-021, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.
