86561-2B500 Front Bumper Grille for HYUNDAI Santa Fe 2009
OE lookup: 86561-2B500 as the primary lookup number
Catalogue code: HY02004-028 for quotation and order tracking
Make: HYUNDAI
Model line: Santa Fe (2009)
Fitment record: 2009 HYUNDAI Santa Fe; verify by VIN and original part
Mounting area: Front bumper area
Reference numbers:
86561-2B500
Fitment check: Check side, opening layout and neighbouring trim before purchase
Purchase note: Request sample, lot quantity, destination and packing terms in the enquiry
Item-specific review: 86561-2B500 on Santa Fe uses HY02004-028 as the controlled front-bumper line; compare Santa Fe frame contour, 86561-2B500 mesh geometry and HY02004-028 attachment direction
Approval record: HY02004-028 should link the 2009 HYUNDAI Santa Fe vehicle evidence to 86561-2B500; retain Santa Fe opening photos and front grille measurements with the buyer decision
Component: Front Bumper Grille for 2009 HYUNDAI Santa Fe
86561-2B500 Front Bumper Grille Product Overview
This application-led listing presents 86561-2B500 as a front bumper grille for 2009 HYUNDAI Santa Fe. Item HY02004-028 is intended for OE-number comparison, not shape-only selection.
OE-Led Fitment Verification for 86561-2B500
Fitment confidence requires three agreeing sources: 86561-2B500, 2009 HYUNDAI Santa Fe and the physical front grille. Do not approve HY02004-028 from a similar mesh pattern alone.
Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.
Inspection, Packaging and Receiving Control
For HY02004-028, quality control begins with identity: confirm 86561-2B500 and the stated front bumper grille. Next review deformation, edge damage, mounting features and colour or texture consistency under neutral light.
For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.
Santa Fe Bumper Grille Function and Position
The front bumper grille occupies the front exterior fascia of the Santa Fe. It should align with the bumper cover, neighbouring trim and air-entry zone without being confused with the crash beam behind it.
The source application is recorded as 09款 圣达菲 前杠格栅. This retained catalogue wording helps trace market, trim and body-style distinctions during buyer verification.
Workshop Handling and Installation Review
Professional trial fitting is recommended for HY02004-028. Confirm that the Santa Fe bumper skin, side guides and underbody connections are correctly seated before judging grille alignment.
Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.
Product-Specific Approval Record for 86561-2B500
The following review points belong to HY02004-028 and the stated 2009 HYUNDAI Santa Fe application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.
- Vehicle evidence 1 — Santa Fe / 86561-2B500: compare clip spacing without bending the replacement grille for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Catalogue proof 2 — HY02004-028 / Front: retain a signed control sample for repeat purchasing decisions for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Packing control 3 — 2009 HYUNDAI Santa Fe / HY02004-028: compare adjacent moulding gaps before locking the centre clips for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Identity gate 4 — 86561-2B500 / HY02004-028: inspect mounting slots for collision distortion before trial fitting for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Workshop checkpoint 5 — Santa Fe / 86561-2B500: verify the photographed part and physical sample share one revision for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Receiving record 6 — HY02004-028 / Front: record the mesh orientation alongside the vehicle production label for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Fitment file 7 — 2009 HYUNDAI Santa Fe / HY02004-028: mark lamp or trim interfaces on the buyer approval photograph for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Geometry control 8 — 86561-2B500 / HY02004-028: note surface texture under neutral lighting before installation for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Sample decision 9 — Santa Fe / 86561-2B500: link receiving photographs to the commercial order-line number for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Order trace 10 — HY02004-028 / Front: record any market-specific openings shown on the original bumper for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Vehicle evidence 11 — 2009 HYUNDAI Santa Fe / HY02004-028: match the grille outline to the stated body style and facelift for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Catalogue proof 12 — 86561-2B500 / HY02004-028: measure the outer frame before comparing the retained bumper aperture for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Packing control 13 — Santa Fe / 86561-2B500: check the centre section against the bumper cover reference points for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Identity gate 14 — HY02004-028 / Front: confirm the lower edge follows the original underbody connection for Santa Fe item HY02004-028 under OE reference 86561-2B500.
- Workshop checkpoint 15 — 2009 HYUNDAI Santa Fe / HY02004-028: verify left and right orientation from the vehicle-facing side for Santa Fe item HY02004-028 under OE reference 86561-2B500.
Application Evidence Narrative for HY02004-028
2009 HYUNDAI Santa Fe buyers can begin identification with 86561-2B500. This front bumper grille is registered under HY02004-028 and described with the application limits needed by parts specialists and body shops.
Mounted in the front bumper area, a front bumper grille completes a defined opening and supports the intended visual and airflow path of the Santa Fe. Its perimeter, mesh pattern and fastening points are vehicle-specific.
Reference 86561-2B500 connects the pictured front bumper grille to 2009 HYUNDAI Santa Fe. Its internal line code, HY02004-028, should remain on the enquiry so vehicle evidence and commercial details stay attached to the same part.
The front bumper grille occupies the front exterior fascia of the Santa Fe. It should align with the bumper cover, neighbouring trim and air-entry zone without being confused with the crash beam behind it.
2009 HYUNDAI Santa Fe buyers can begin identification with 86561-2B500. This front bumper grille is registered under HY02004-028 and described with the application limits needed by parts specialists and body shops.
The front bumper grille forms part of the Santa Fe bumper assembly rather than a universal mesh insert. Its service role is to restore the correct opening, surrounding body line and attachment interface.
The identity chain for HY02004-028 is HYUNDAI Santa Fe, 2009, front bumper position and OE 86561-2B500. Keep HY02004-028 beside Santa Fe vehicle evidence, keep 86561-2B500 beside the removed grille marking, and keep the front location beside the approval photographs.
86561-2B500 Front Bumper Grille for HYUNDAI Santa Fe 2009 is the controlled search entity for this page. In a buyer file, 86561-2B500 should lead the Santa Fe comparison, HY02004-028 should lead the supplier trace, and 2009 HYUNDAI Santa Fe should lead the vehicle-side confirmation before shipment.
Product Technical Specifications
| Product type | Front Bumper Grille |
|---|---|
| Primary OE reference | 86561-2B500 |
| Cross-reference numbers | 86561-2B500 |
| Internal item code | HY02004-028 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Santa Fe |
| Model year | 2009 |
| Installation position | Front bumper area |
| Applicable vehicle | 2009 HYUNDAI Santa Fe |
Wholesale Procurement for HY02004-028
The clearest B2B request combines 86561-2B500, supplier code HY02004-028, 2009 HYUNDAI Santa Fe and destination. This makes it easier to separate technical approval from commercial terms and shipping choices.
Compatibility remains an application decision. The OE reference, VIN evidence and physical grille geometry should agree before 86561-2B500 is released for shipment.
Frequently Asked Questions
Can this front bumper grille fit every Santa Fe?
No universal-fit claim is made. Facelift, body style, region and trim can change the grille.
Why is the bumper position important for 86561-2B500?
Front, rear, upper, lower and side grille pieces are not interchangeable. This record describes the front bumper location.
Are brackets, emblems and fasteners included with 86561-2B500?
Supply scope follows the pictured HY02004-028 component. Confirm loose hardware, badges, covers and accessories with the quotation before ordering.
How should 86561-2B500 be checked after delivery?
Verify identity first, then inspect the front bumper grille frame, mesh, tabs, finish and packing-related distortion before installation.
Where is the 86561-2B500 grille installed on the Santa Fe?
The listing places it in the front bumper area of the Santa Fe. It is not presented as a complete bumper cover or crash reinforcement.
Request a Product and Fitment Review
Send the complete OE reference 86561-2B500, item code HY02004-028, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.
