86560-1Y500 Front Bumper Grille for KIA Picanto 2014

86560-1Y500 Front Bumper Grille Product Overview

This page documents 86560-1Y500, a front bumper grille associated with 2014 KIA Picanto. Rather than treating grille parts as universal, the listing keeps internal reference KA02004-021 and the stated application visible for technical review.

Picanto Bumper Grille Function and Position

The listed grille belongs to the front bumper stack of the Picanto. Its geometry can affect panel gaps, adjacent trim seating and the clear air-entry area.

The original product row specifies 14款 PICANTO TA 前保险杠下主格栅. Procurement teams should keep this source note with the English fitment record when reviewing neighbouring versions.

Workshop Handling and Installation Review

Protect the visible face of KA02004-021 during assembly and never use clip force to compensate for a mismatched Picanto bumper. A correct front application should follow the original attachment path.

Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.

OE-Led Fitment Verification for 86560-1Y500

Use 86560-1Y500 as the first filter and vehicle production data as the second. A trim or facelift change can make KA02004-021 unsuitable even where 2014 KIA Picanto appears broadly similar.

Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.

Inspection, Packaging and Receiving Control

The 86560-1Y500 part benefits from a sample-based inspection plan: confirm identity, geometry and visible finish first, then monitor KA02004-021 lot packing so long edges are not flexed during transport.

For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.

Product-Specific Approval Record for 86560-1Y500

The following review points belong to KA02004-021 and the stated 2014 KIA Picanto application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.

• Order trace 1 — KA02004-021 / Front: confirm the lower edge follows the original underbody connection for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Vehicle evidence 2 — 2014 KIA Picanto / KA02004-021: verify left and right orientation from the vehicle-facing side for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Catalogue proof 3 — 86560-1Y500 / KA02004-021: check transport support around projecting corners and narrow bridges for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Packing control 4 — Picanto / 86560-1Y500: confirm transferred covers or badges fit without altering the frame for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Identity gate 5 — KA02004-021 / Front: keep the production-date evidence beside the approved OE lookup for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Workshop checkpoint 6 — 2014 KIA Picanto / KA02004-021: photograph every locator before the damaged grille leaves the workshop for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Receiving record 7 — 86560-1Y500 / KA02004-021: inspect side returns for the same depth and fastening direction for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Fitment file 8 — Picanto / 86560-1Y500: compare clip spacing without bending the replacement grille for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Geometry control 9 — KA02004-021 / Front: retain a signed control sample for repeat purchasing decisions for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Sample decision 10 — 2014 KIA Picanto / KA02004-021: compare adjacent moulding gaps before locking the centre clips for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Order trace 11 — 86560-1Y500 / KA02004-021: inspect mounting slots for collision distortion before trial fitting for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Vehicle evidence 12 — Picanto / 86560-1Y500: verify the photographed part and physical sample share one revision for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Catalogue proof 13 — KA02004-021 / Front: record the mesh orientation alongside the vehicle production label for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Packing control 14 — 2014 KIA Picanto / KA02004-021: mark lamp or trim interfaces on the buyer approval photograph for Picanto item KA02004-021 under OE reference 86560-1Y500.
• Identity gate 15 — 86560-1Y500 / KA02004-021: note surface texture under neutral lighting before installation for Picanto item KA02004-021 under OE reference 86560-1Y500.

Application Evidence Narrative for KA02004-021

The subject is a front bumper grille catalogued as 86560-1Y500 for 2014 KIA Picanto. Supplier code KA02004-021 supports traceable enquiries, sample approval and repeat-order documentation.

The front grille area is sensitive to trim and market changes. For this Picanto item, frame dimensions, mesh layout and mounting tabs must agree with the original component.

2014 KIA Picanto buyers can begin identification with 86560-1Y500. This front bumper grille is registered under KA02004-021 and described with the application limits needed by parts specialists and body shops.

Mounted in the front bumper area, a front bumper grille completes a defined opening and supports the intended visual and airflow path of the Picanto. Its perimeter, mesh pattern and fastening points are vehicle-specific.

86560-1Y500 identifies this front bumper grille for 2014 KIA Picanto. The record links OE-led search intent with supplier code KA02004-021, a precise vehicle reference and the photographs saved with the source item.

Within the Picanto fascia, the front bumper grille is an application-moulded exterior piece. The selected part needs the same side, opening arrangement and tab layout as the removed front grille.

The identity chain for KA02004-021 is KIA Picanto, 2014, front bumper position and OE 86560-1Y500. Keep KA02004-021 beside Picanto vehicle evidence, keep 86560-1Y500 beside the removed grille marking, and keep the front location beside the approval photographs.

86560-1Y500 Front Bumper Grille for KIA Picanto 2014 is the controlled search entity for this page. In a buyer file, 86560-1Y500 should lead the Picanto comparison, KA02004-021 should lead the supplier trace, and 2014 KIA Picanto should lead the vehicle-side confirmation before shipment.

Product Technical Specifications

Wholesale Procurement for KA02004-021

Distributors requesting 2014 KIA Picanto bumper parts should keep 86560-1Y500 and KA02004-021 on every enquiry revision. Include delivery market, target volume and the fitment evidence already checked.

Buyers seeking 86560-1Y500 may request a technical review with vehicle details and original-part photographs before confirming commercial terms.

Frequently Asked Questions

What should be included in a wholesale enquiry for 86560-1Y500?

Send 86560-1Y500, item KA02004-021, vehicle details, quantity, destination and any sample, packaging, label or inspection requirements.

Should installers compare the original Picanto grille with KA02004-021?

Yes. Review edge profile, mesh design, fastening points, openings and neighbouring trim before forcing any clips into place.

What vehicle information helps verify KA02004-021?

Provide the VIN, production date, market, trim, body style and photos of the removed part. The recorded application is 2014 KIA Picanto.

What does 86560-1Y500 identify?

86560-1Y500 is the primary reference recorded for this front bumper grille and 2014 KIA Picanto. It should be checked against the original part and vehicle data.

How should fitment for 86560-1Y500 be approved?

Confirm 2014 KIA Picanto, VIN or build date, original OE marking, bumper opening and tab layout. Keep internal code KA02004-021 on the review record.

Request a Product and Fitment Review

Send the complete OE reference 86560-1Y500, item code KA02004-021, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.