86560-07800 Front Bumper Grille for KIA Picanto 2010

86560-07800 Front Bumper Grille Product Overview

2010 KIA Picanto buyers can begin identification with 86560-07800. This front bumper grille is registered under KA02004-018 and described with the application limits needed by parts specialists and body shops.

Workshop Handling and Installation Review

Before fitting KA02004-018, clean the front aperture and compare all retained hardware. On the Picanto, verify that each tab enters its intended slot and that no edge is held under permanent stress.

Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.

OE-Led Fitment Verification for 86560-07800

A correct order requires agreement between 86560-07800, 2010 KIA Picanto and the front bumper configuration. Photograph the original tabs and openings before selecting KA02004-018.

Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.

Picanto Bumper Grille Function and Position

The front grille area is sensitive to trim and market changes. For this Picanto item, frame dimensions, mesh layout and mounting tabs must agree with the original component.

The source application is recorded as 10款 PICANTO SA 前杠下格栅. This retained catalogue wording helps trace market, trim and body-style distinctions during buyer verification.

Inspection, Packaging and Receiving Control

The 86560-07800 part benefits from a sample-based inspection plan: confirm identity, geometry and visible finish first, then monitor KA02004-018 lot packing so long edges are not flexed during transport.

For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.

Product-Specific Approval Record for 86560-07800

The following review points belong to KA02004-018 and the stated 2010 KIA Picanto application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.

• Receiving record 1 — 86560-07800 / KA02004-018: check transport support around projecting corners and narrow bridges for Picanto item KA02004-018 under OE reference 86560-07800.
• Fitment file 2 — Picanto / 86560-07800: confirm transferred covers or badges fit without altering the frame for Picanto item KA02004-018 under OE reference 86560-07800.
• Geometry control 3 — KA02004-018 / Front: keep the production-date evidence beside the approved OE lookup for Picanto item KA02004-018 under OE reference 86560-07800.
• Sample decision 4 — 2010 KIA Picanto / KA02004-018: photograph every locator before the damaged grille leaves the workshop for Picanto item KA02004-018 under OE reference 86560-07800.
• Order trace 5 — 86560-07800 / KA02004-018: inspect side returns for the same depth and fastening direction for Picanto item KA02004-018 under OE reference 86560-07800.
• Vehicle evidence 6 — Picanto / 86560-07800: compare clip spacing without bending the replacement grille for Picanto item KA02004-018 under OE reference 86560-07800.
• Catalogue proof 7 — KA02004-018 / Front: retain a signed control sample for repeat purchasing decisions for Picanto item KA02004-018 under OE reference 86560-07800.
• Packing control 8 — 2010 KIA Picanto / KA02004-018: compare adjacent moulding gaps before locking the centre clips for Picanto item KA02004-018 under OE reference 86560-07800.
• Identity gate 9 — 86560-07800 / KA02004-018: inspect mounting slots for collision distortion before trial fitting for Picanto item KA02004-018 under OE reference 86560-07800.
• Workshop checkpoint 10 — Picanto / 86560-07800: verify the photographed part and physical sample share one revision for Picanto item KA02004-018 under OE reference 86560-07800.
• Receiving record 11 — KA02004-018 / Front: record the mesh orientation alongside the vehicle production label for Picanto item KA02004-018 under OE reference 86560-07800.
• Fitment file 12 — 2010 KIA Picanto / KA02004-018: mark lamp or trim interfaces on the buyer approval photograph for Picanto item KA02004-018 under OE reference 86560-07800.
• Geometry control 13 — 86560-07800 / KA02004-018: note surface texture under neutral lighting before installation for Picanto item KA02004-018 under OE reference 86560-07800.
• Sample decision 14 — Picanto / 86560-07800: link receiving photographs to the commercial order-line number for Picanto item KA02004-018 under OE reference 86560-07800.
• Order trace 15 — KA02004-018 / Front: record any market-specific openings shown on the original bumper for Picanto item KA02004-018 under OE reference 86560-07800.

Application Evidence Narrative for KA02004-018

For the bumper grille line identified by KA02004-018, the principal OE reference is 86560-07800. It is listed for 2010 KIA Picanto and should be approved from the number, vehicle details and physical mounting pattern together.

The front bumper grille occupies the front exterior fascia of the Picanto. It should align with the bumper cover, neighbouring trim and air-entry zone without being confused with the crash beam behind it.

Prepared for wholesale and replacement-part enquiries, 86560-07800 covers a front bumper grille for 2010 KIA Picanto. The KA02004-018 record combines entity facts, fitment cautions and practical order information.

The front bumper grille forms part of the Picanto bumper assembly rather than a universal mesh insert. Its service role is to restore the correct opening, surrounding body line and attachment interface.

A sourcing check for 2010 KIA Picanto can use 86560-07800 to locate this front bumper grille. The page records KA02004-018 together with product facts that search engines, AI answer systems and professional buyers can interpret directly.

Mounted in the front bumper area, a front bumper grille completes a defined opening and supports the intended visual and airflow path of the Picanto. Its perimeter, mesh pattern and fastening points are vehicle-specific.

The identity chain for KA02004-018 is KIA Picanto, 2010, front bumper position and OE 86560-07800. Keep KA02004-018 beside Picanto vehicle evidence, keep 86560-07800 beside the removed grille marking, and keep the front location beside the approval photographs.

86560-07800 Front Bumper Grille for KIA Picanto 2010 is the controlled search entity for this page. In a buyer file, 86560-07800 should lead the Picanto comparison, KA02004-018 should lead the supplier trace, and 2010 KIA Picanto should lead the vehicle-side confirmation before shipment.

Product Technical Specifications

Wholesale Procurement for KA02004-018

Procurement approval works best when 86560-07800, KA02004-018 and 2010 KIA Picanto remain together from enquiry through receiving. Note destination and inspection expectations before the commercial offer is finalised.

Yongshang Auto supports OE-led sourcing for exterior body parts. A final quotation for 86560-07800 can be prepared after the buyer confirms vehicle evidence, quantity and destination.

Frequently Asked Questions

What vehicle information helps verify KA02004-018?

Provide the VIN, production date, market, trim, body style and photos of the removed part. The recorded application is 2010 KIA Picanto.

What does 86560-07800 identify?

86560-07800 is the primary reference recorded for this front bumper grille and 2010 KIA Picanto. It should be checked against the original part and vehicle data.

How should fitment for 86560-07800 be approved?

Confirm 2010 KIA Picanto, VIN or build date, original OE marking, bumper opening and tab layout. Keep internal code KA02004-018 on the review record.

What should be included in a wholesale enquiry for 86560-07800?

Send 86560-07800, item KA02004-018, vehicle details, quantity, destination and any sample, packaging, label or inspection requirements.

Should installers compare the original Picanto grille with KA02004-018?

Yes. Review edge profile, mesh design, fastening points, openings and neighbouring trim before forcing any clips into place.

Request a Product and Fitment Review

Send the complete OE reference 86560-07800, item code KA02004-018, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.