86532-G6000 Front Bumper Grille for KIA Picanto 2017
Product: Front Bumper Grille for 2017 KIA Picanto
Primary OE: 86532-G6000 as the primary lookup number
Item code: KA02004-027 for quotation and order tracking
Vehicle brand: KIA
Vehicle model: Picanto (2017)
Application: 2017 KIA Picanto (GT Line specification); verify by VIN and original part
Position: Front bumper area
Cross-reference numbers:
86532-G6000
Verification: Review market, trim and attachment points together with 86532-G6000
Supply note: Request sample, lot quantity, destination and packing terms in the enquiry
Item-specific review: 86532-G6000 on Picanto uses KA02004-027 as the controlled front-bumper line; compare Picanto frame contour, 86532-G6000 mesh geometry and KA02004-027 attachment direction
Approval record: KA02004-027 should link the 2017 KIA Picanto (GT Line specification) vehicle evidence to 86532-G6000; retain Picanto opening photos and front grille measurements with the buyer decision
86532-G6000 Front Bumper Grille Product Overview
The front bumper grille shown for 2017 KIA Picanto (GT Line specification) is indexed by 86532-G6000 and supplier item KA02004-027. This description explains what is known, what needs vehicle-side confirmation and what a buyer should include in a request.
Picanto Bumper Grille Function and Position
On the Picanto, this front grille element closes a model-shaped aperture while permitting the designed air passage. Clip direction, outer contour and adjacent mouldings matter as much as the overall outline. Recorded configuration: GT Line specification.
The saved source description is 17款 PICANTO GT LINE 前保险杠下格栅. It should be compared with VIN data and the removed grille before the application is approved.
OE-Led Fitment Verification for 86532-G6000
A correct order requires agreement between 86532-G6000, 2017 KIA Picanto (GT Line specification) and the front bumper configuration. Photograph the original tabs and openings before selecting KA02004-027.
Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.
Workshop Handling and Installation Review
The front fascia should be inspected for previous repair distortion before KA02004-027 is installed. Reusing damaged clips can create loose seating or uneven gaps on the Picanto.
Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.
Inspection, Packaging and Receiving Control
The 86532-G6000 part benefits from a sample-based inspection plan: confirm identity, geometry and visible finish first, then monitor KA02004-027 lot packing so long edges are not flexed during transport.
For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.
Product-Specific Approval Record for 86532-G6000
The following review points belong to KA02004-027 and the stated 2017 KIA Picanto (GT Line specification) application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.
- Identity gate 1 — 86532-G6000 / KA02004-027: measure the outer frame before comparing the retained bumper aperture for Picanto item KA02004-027 under OE reference 86532-G6000.
- Workshop checkpoint 2 — Picanto / 86532-G6000: check the centre section against the bumper cover reference points for Picanto item KA02004-027 under OE reference 86532-G6000.
- Receiving record 3 — KA02004-027 / Front: confirm the lower edge follows the original underbody connection for Picanto item KA02004-027 under OE reference 86532-G6000.
- Fitment file 4 — 2017 KIA Picanto (GT Line specification) / KA02004-027: verify left and right orientation from the vehicle-facing side for Picanto item KA02004-027 under OE reference 86532-G6000.
- Geometry control 5 — 86532-G6000 / KA02004-027: check transport support around projecting corners and narrow bridges for Picanto item KA02004-027 under OE reference 86532-G6000.
- Sample decision 6 — Picanto / 86532-G6000: confirm transferred covers or badges fit without altering the frame for Picanto item KA02004-027 under OE reference 86532-G6000.
- Order trace 7 — KA02004-027 / Front: keep the production-date evidence beside the approved OE lookup for Picanto item KA02004-027 under OE reference 86532-G6000.
- Vehicle evidence 8 — 2017 KIA Picanto (GT Line specification) / KA02004-027: photograph every locator before the damaged grille leaves the workshop for Picanto item KA02004-027 under OE reference 86532-G6000.
- Catalogue proof 9 — 86532-G6000 / KA02004-027: inspect side returns for the same depth and fastening direction for Picanto item KA02004-027 under OE reference 86532-G6000.
- Packing control 10 — Picanto / 86532-G6000: compare clip spacing without bending the replacement grille for Picanto item KA02004-027 under OE reference 86532-G6000.
- Identity gate 11 — KA02004-027 / Front: retain a signed control sample for repeat purchasing decisions for Picanto item KA02004-027 under OE reference 86532-G6000.
- Workshop checkpoint 12 — 2017 KIA Picanto (GT Line specification) / KA02004-027: compare adjacent moulding gaps before locking the centre clips for Picanto item KA02004-027 under OE reference 86532-G6000.
- Receiving record 13 — 86532-G6000 / KA02004-027: inspect mounting slots for collision distortion before trial fitting for Picanto item KA02004-027 under OE reference 86532-G6000.
- Fitment file 14 — Picanto / 86532-G6000: verify the photographed part and physical sample share one revision for Picanto item KA02004-027 under OE reference 86532-G6000.
- Geometry control 15 — KA02004-027 / Front: record the mesh orientation alongside the vehicle production label for Picanto item KA02004-027 under OE reference 86532-G6000.
Application Evidence Narrative for KA02004-027
86532-G6000 is documented here as the stated front bumper grille for 2017 KIA Picanto (GT Line specification). Keeping catalogue code KA02004-027 beside the application reduces ambiguity during quotations and receiving inspection.
On the Picanto, this front grille element closes a model-shaped aperture while permitting the designed air passage. Clip direction, outer contour and adjacent mouldings matter as much as the overall outline. Recorded configuration: GT Line specification.
The subject is a front bumper grille catalogued as 86532-G6000 for 2017 KIA Picanto (GT Line specification). Supplier code KA02004-027 supports traceable enquiries, sample approval and repeat-order documentation.
The front grille area is sensitive to trim and market changes. For this Picanto item, frame dimensions, mesh layout and mounting tabs must agree with the original component. The source version is GT Line specification.
The subject is a front bumper grille catalogued as 86532-G6000 for 2017 KIA Picanto (GT Line specification). Supplier code KA02004-027 supports traceable enquiries, sample approval and repeat-order documentation.
The front grille area is sensitive to trim and market changes. For this Picanto item, frame dimensions, mesh layout and mounting tabs must agree with the original component. The source version is GT Line specification.
The identity chain for KA02004-027 is KIA Picanto, 2017, front bumper position and OE 86532-G6000. Keep KA02004-027 beside Picanto vehicle evidence, keep 86532-G6000 beside the removed grille marking, and keep the front location beside the approval photographs.
86532-G6000 Front Bumper Grille for KIA Picanto 2017 is the controlled search entity for this page. In a buyer file, 86532-G6000 should lead the Picanto comparison, KA02004-027 should lead the supplier trace, and 2017 KIA Picanto (GT Line specification) should lead the vehicle-side confirmation before shipment.
Product Technical Specifications
| Product type | Front Bumper Grille |
|---|---|
| Primary OE reference | 86532-G6000 |
| Cross-reference numbers | 86532-G6000 |
| Internal item code | KA02004-027 |
| Vehicle brand | KIA |
| Vehicle model | Picanto |
| Model year | 2017 |
| Installation position | Front bumper area |
| Applicable vehicle | 2017 KIA Picanto (GT Line specification) |
Wholesale Procurement for KA02004-027
A traceable order file for 2017 KIA Picanto (GT Line specification) should show 86532-G6000, KA02004-027, buyer-approved photos and requested quantity. Confirm carton dimensions before comparing landed costs for consolidated shipments.
For repeat programmes, keep KA02004-027, the approved sample, fitment photos and packaging standard under one revision-controlled record.
Frequently Asked Questions
What does 86532-G6000 identify?
86532-G6000 is the primary reference recorded for this front bumper grille and 2017 KIA Picanto (GT Line specification). It should be checked against the original part and vehicle data.
How should fitment for 86532-G6000 be approved?
Confirm 2017 KIA Picanto (GT Line specification), VIN or build date, original OE marking, bumper opening and tab layout. Keep internal code KA02004-027 on the review record.
What should be included in a wholesale enquiry for 86532-G6000?
Send 86532-G6000, item KA02004-027, vehicle details, quantity, destination and any sample, packaging, label or inspection requirements.
Should installers compare the original Picanto grille with KA02004-027?
Yes. Review edge profile, mesh design, fastening points, openings and neighbouring trim before forcing any clips into place.
What vehicle information helps verify KA02004-027?
Provide the VIN, production date, market, trim, body style and photos of the removed part. The recorded application is 2017 KIA Picanto (GT Line specification).
Request a Product and Fitment Review
Send the complete OE reference 86532-G6000, item code KA02004-027, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.
