86531-K6410 Front Bumper Grille for HYUNDAI i10 2021

86531-K6410 Front Bumper Grille Product Overview

For 2021 HYUNDAI i10 (high-spec version; mid/high-spec version) exterior repair sourcing, reference 86531-K6410 points to the listed front bumper grille. Catalogue item HY02004-048 is presented with fitment evidence that helps buyers separate it from nearby bumper variants.

Workshop Handling and Installation Review

The front fascia should be inspected for previous repair distortion before HY02004-048 is installed. Reusing damaged clips can create loose seating or uneven gaps on the i10.

Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.

OE-Led Fitment Verification for 86531-K6410

Use 86531-K6410 as the first filter and vehicle production data as the second. A trim or facelift change can make HY02004-048 unsuitable even where 2021 HYUNDAI i10 (high-spec version; mid/high-spec version) appears broadly similar.

Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.

i10 Bumper Grille Function and Position

Within the i10 fascia, the front bumper grille is an application-moulded exterior piece. The selected part needs the same side, opening arrangement and tab layout as the removed front grille. The item is catalogued as high-spec version; mid/high-spec version.

The saved source description is 21款 I10 4D 前保险杠下格栅(中高配). It should be compared with VIN data and the removed grille before the application is approved.

Inspection, Packaging and Receiving Control

The 86531-K6410 part benefits from a sample-based inspection plan: confirm identity, geometry and visible finish first, then monitor HY02004-048 lot packing so long edges are not flexed during transport.

For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.

Product-Specific Approval Record for 86531-K6410

The following review points belong to HY02004-048 and the stated 2021 HYUNDAI i10 (high-spec version; mid/high-spec version) application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.

• Identity gate 1 — HY02004-048 / Front: retain a signed control sample for repeat purchasing decisions for i10 item HY02004-048 under OE reference 86531-K6410.
• Workshop checkpoint 2 — 2021 HYUNDAI i10 (high-spec version; mid/high-spec version) / HY02004-048: compare adjacent moulding gaps before locking the centre clips for i10 item HY02004-048 under OE reference 86531-K6410.
• Receiving record 3 — 86531-K6410 / HY02004-048: inspect mounting slots for collision distortion before trial fitting for i10 item HY02004-048 under OE reference 86531-K6410.
• Fitment file 4 — i10 / 86531-K6410: verify the photographed part and physical sample share one revision for i10 item HY02004-048 under OE reference 86531-K6410.
• Geometry control 5 — HY02004-048 / Front: record the mesh orientation alongside the vehicle production label for i10 item HY02004-048 under OE reference 86531-K6410.
• Sample decision 6 — 2021 HYUNDAI i10 (high-spec version; mid/high-spec version) / HY02004-048: mark lamp or trim interfaces on the buyer approval photograph for i10 item HY02004-048 under OE reference 86531-K6410.
• Order trace 7 — 86531-K6410 / HY02004-048: note surface texture under neutral lighting before installation for i10 item HY02004-048 under OE reference 86531-K6410.
• Vehicle evidence 8 — i10 / 86531-K6410: link receiving photographs to the commercial order-line number for i10 item HY02004-048 under OE reference 86531-K6410.
• Catalogue proof 9 — HY02004-048 / Front: record any market-specific openings shown on the original bumper for i10 item HY02004-048 under OE reference 86531-K6410.
• Packing control 10 — 2021 HYUNDAI i10 (high-spec version; mid/high-spec version) / HY02004-048: match the grille outline to the stated body style and facelift for i10 item HY02004-048 under OE reference 86531-K6410.
• Identity gate 11 — 86531-K6410 / HY02004-048: measure the outer frame before comparing the retained bumper aperture for i10 item HY02004-048 under OE reference 86531-K6410.
• Workshop checkpoint 12 — i10 / 86531-K6410: check the centre section against the bumper cover reference points for i10 item HY02004-048 under OE reference 86531-K6410.
• Receiving record 13 — HY02004-048 / Front: confirm the lower edge follows the original underbody connection for i10 item HY02004-048 under OE reference 86531-K6410.
• Fitment file 14 — 2021 HYUNDAI i10 (high-spec version; mid/high-spec version) / HY02004-048: verify left and right orientation from the vehicle-facing side for i10 item HY02004-048 under OE reference 86531-K6410.
• Geometry control 15 — 86531-K6410 / HY02004-048: check transport support around projecting corners and narrow bridges for i10 item HY02004-048 under OE reference 86531-K6410.

Application Evidence Narrative for HY02004-048

Prepared for wholesale and replacement-part enquiries, 86531-K6410 covers a front bumper grille for 2021 HYUNDAI i10 (high-spec version; mid/high-spec version). The HY02004-048 record combines entity facts, fitment cautions and practical order information.

Positioned at the front of the i10, the grille is shaped around application-specific bumper geometry. The part may meet lamp bezels, tow-hook covers or trim strips depending on specification. The stated item is the high-spec version; mid/high-spec version.

A sourcing check for 2021 HYUNDAI i10 (high-spec version; mid/high-spec version) can use 86531-K6410 to locate this front bumper grille. The page records HY02004-048 together with product facts that search engines, AI answer systems and professional buyers can interpret directly.

Positioned at the front of the i10, the grille is shaped around application-specific bumper geometry. The part may meet lamp bezels, tow-hook covers or trim strips depending on specification. The stated item is the high-spec version; mid/high-spec version.

86531-K6410 is documented here as the stated front bumper grille for 2021 HYUNDAI i10 (high-spec version; mid/high-spec version). Keeping catalogue code HY02004-048 beside the application reduces ambiguity during quotations and receiving inspection.

A correct front bumper grille helps return the i10 bumper to its designed appearance and ventilation arrangement. It is not described as the complete bumper cover, reinforcement or energy absorber. The product row notes the high-spec version; mid/high-spec version.

The identity chain for HY02004-048 is HYUNDAI i10, 2021, front bumper position and OE 86531-K6410. Keep HY02004-048 beside i10 vehicle evidence, keep 86531-K6410 beside the removed grille marking, and keep the front location beside the approval photographs.

86531-K6410 Front Bumper Grille for HYUNDAI i10 2021 is the controlled search entity for this page. In a buyer file, 86531-K6410 should lead the i10 comparison, HY02004-048 should lead the supplier trace, and 2021 HYUNDAI i10 (high-spec version; mid/high-spec version) should lead the vehicle-side confirmation before shipment.

Product Technical Specifications

Wholesale Procurement for HY02004-048

A traceable order file for 2021 HYUNDAI i10 (high-spec version; mid/high-spec version) should show 86531-K6410, HY02004-048, buyer-approved photos and requested quantity. Confirm carton dimensions before comparing landed costs for consolidated shipments.

Yongshang Auto supports OE-led sourcing for exterior body parts. A final quotation for 86531-K6410 can be prepared after the buyer confirms vehicle evidence, quantity and destination.

Frequently Asked Questions

What does 86531-K6410 identify?

86531-K6410 is the primary reference recorded for this front bumper grille and 2021 HYUNDAI i10 (high-spec version; mid/high-spec version). It should be checked against the original part and vehicle data.

How should fitment for 86531-K6410 be approved?

Confirm 2021 HYUNDAI i10 (high-spec version; mid/high-spec version), VIN or build date, original OE marking, bumper opening and tab layout. Keep internal code HY02004-048 on the review record.

What should be included in a wholesale enquiry for 86531-K6410?

Send 86531-K6410, item HY02004-048, vehicle details, quantity, destination and any sample, packaging, label or inspection requirements.

Should installers compare the original i10 grille with HY02004-048?

Yes. Review edge profile, mesh design, fastening points, openings and neighbouring trim before forcing any clips into place.

What vehicle information helps verify HY02004-048?

Provide the VIN, production date, market, trim, body style and photos of the removed part. The recorded application is 2021 HYUNDAI i10 (high-spec version; mid/high-spec version).

Request a Product and Fitment Review

Send the complete OE reference 86531-K6410, item code HY02004-048, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.