86522-0X200 Front Bumper Grille for HYUNDAI i10 2011

86522-0X200 Front Bumper Grille Product Overview

86522-0X200 is documented here as the stated front bumper grille for 2011 HYUNDAI i10. Keeping catalogue code HY02004-041 beside the application reduces ambiguity during quotations and receiving inspection.

Workshop Handling and Installation Review

For HY02004-041, verify accessory transfer requirements before the old grille is discarded. The i10 repair may involve separate emblems, mouldings, covers or fasteners at the front bumper.

Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.

OE-Led Fitment Verification for 86522-0X200

A correct order requires agreement between 86522-0X200, 2011 HYUNDAI i10 and the front bumper configuration. Photograph the original tabs and openings before selecting HY02004-041.

Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.

i10 Bumper Grille Function and Position

Mounted in the front bumper area, a front bumper grille completes a defined opening and supports the intended visual and airflow path of the i10. Its perimeter, mesh pattern and fastening points are vehicle-specific.

Catalogue evidence for HY02004-041 includes the source text 11款 I10 前保险杠格栅. This detail can expose regional, trim or position differences that a broad model label may hide.

Inspection, Packaging and Receiving Control

The 86522-0X200 part benefits from a sample-based inspection plan: confirm identity, geometry and visible finish first, then monitor HY02004-041 lot packing so long edges are not flexed during transport.

For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.

Product-Specific Approval Record for 86522-0X200

The following review points belong to HY02004-041 and the stated 2011 HYUNDAI i10 application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.

• Catalogue proof 1 — 86522-0X200 / HY02004-041: note surface texture under neutral lighting before installation for i10 item HY02004-041 under OE reference 86522-0X200.
• Packing control 2 — i10 / 86522-0X200: link receiving photographs to the commercial order-line number for i10 item HY02004-041 under OE reference 86522-0X200.
• Identity gate 3 — HY02004-041 / Front: record any market-specific openings shown on the original bumper for i10 item HY02004-041 under OE reference 86522-0X200.
• Workshop checkpoint 4 — 2011 HYUNDAI i10 / HY02004-041: match the grille outline to the stated body style and facelift for i10 item HY02004-041 under OE reference 86522-0X200.
• Receiving record 5 — 86522-0X200 / HY02004-041: measure the outer frame before comparing the retained bumper aperture for i10 item HY02004-041 under OE reference 86522-0X200.
• Fitment file 6 — i10 / 86522-0X200: check the centre section against the bumper cover reference points for i10 item HY02004-041 under OE reference 86522-0X200.
• Geometry control 7 — HY02004-041 / Front: confirm the lower edge follows the original underbody connection for i10 item HY02004-041 under OE reference 86522-0X200.
• Sample decision 8 — 2011 HYUNDAI i10 / HY02004-041: verify left and right orientation from the vehicle-facing side for i10 item HY02004-041 under OE reference 86522-0X200.
• Order trace 9 — 86522-0X200 / HY02004-041: check transport support around projecting corners and narrow bridges for i10 item HY02004-041 under OE reference 86522-0X200.
• Vehicle evidence 10 — i10 / 86522-0X200: confirm transferred covers or badges fit without altering the frame for i10 item HY02004-041 under OE reference 86522-0X200.
• Catalogue proof 11 — HY02004-041 / Front: keep the production-date evidence beside the approved OE lookup for i10 item HY02004-041 under OE reference 86522-0X200.
• Packing control 12 — 2011 HYUNDAI i10 / HY02004-041: photograph every locator before the damaged grille leaves the workshop for i10 item HY02004-041 under OE reference 86522-0X200.
• Identity gate 13 — 86522-0X200 / HY02004-041: inspect side returns for the same depth and fastening direction for i10 item HY02004-041 under OE reference 86522-0X200.
• Workshop checkpoint 14 — i10 / 86522-0X200: compare clip spacing without bending the replacement grille for i10 item HY02004-041 under OE reference 86522-0X200.
• Receiving record 15 — HY02004-041 / Front: retain a signed control sample for repeat purchasing decisions for i10 item HY02004-041 under OE reference 86522-0X200.

Application Evidence Narrative for HY02004-041

For 2011 HYUNDAI i10 exterior repair sourcing, reference 86522-0X200 points to the listed front bumper grille. Catalogue item HY02004-041 is presented with fitment evidence that helps buyers separate it from nearby bumper variants.

Within the i10 fascia, the front bumper grille is an application-moulded exterior piece. The selected part needs the same side, opening arrangement and tab layout as the removed front grille.

The front bumper grille shown for 2011 HYUNDAI i10 is indexed by 86522-0X200 and supplier item HY02004-041. This description explains what is known, what needs vehicle-side confirmation and what a buyer should include in a request.

A correct front bumper grille helps return the i10 bumper to its designed appearance and ventilation arrangement. It is not described as the complete bumper cover, reinforcement or energy absorber.

For the bumper grille line identified by HY02004-041, the principal OE reference is 86522-0X200. It is listed for 2011 HYUNDAI i10 and should be approved from the number, vehicle details and physical mounting pattern together.

The front bumper grille occupies the front exterior fascia of the i10. It should align with the bumper cover, neighbouring trim and air-entry zone without being confused with the crash beam behind it.

The identity chain for HY02004-041 is HYUNDAI i10, 2011, front bumper position and OE 86522-0X200. Keep HY02004-041 beside i10 vehicle evidence, keep 86522-0X200 beside the removed grille marking, and keep the front location beside the approval photographs.

86522-0X200 Front Bumper Grille for HYUNDAI i10 2011 is the controlled search entity for this page. In a buyer file, 86522-0X200 should lead the i10 comparison, HY02004-041 should lead the supplier trace, and 2011 HYUNDAI i10 should lead the vehicle-side confirmation before shipment.

Product Technical Specifications

Wholesale Procurement for HY02004-041

Importers can request pricing under 86522-0X200 and HY02004-041. State whether the 2011 HYUNDAI i10 line is for a sample, stock order or repeat programme so inspection and packing can be planned accordingly.

Yongshang Auto supports OE-led sourcing for exterior body parts. A final quotation for 86522-0X200 can be prepared after the buyer confirms vehicle evidence, quantity and destination.

Frequently Asked Questions

How should fitment for 86522-0X200 be approved?

Confirm 2011 HYUNDAI i10, VIN or build date, original OE marking, bumper opening and tab layout. Keep internal code HY02004-041 on the review record.

What should be included in a wholesale enquiry for 86522-0X200?

Send 86522-0X200, item HY02004-041, vehicle details, quantity, destination and any sample, packaging, label or inspection requirements.

Should installers compare the original i10 grille with HY02004-041?

Yes. Review edge profile, mesh design, fastening points, openings and neighbouring trim before forcing any clips into place.

What vehicle information helps verify HY02004-041?

Provide the VIN, production date, market, trim, body style and photos of the removed part. The recorded application is 2011 HYUNDAI i10.

What does 86522-0X200 identify?

86522-0X200 is the primary reference recorded for this front bumper grille and 2011 HYUNDAI i10. It should be checked against the original part and vehicle data.

Request a Product and Fitment Review

Send the complete OE reference 86522-0X200, item code HY02004-041, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.