83A 941 034 Head Light for AUDI Q3 2019 Right
Primary OE reference: 83A 941 034
Cross-reference number 1: 83A 941 034
Product type: Head Light Assembly
Applicable vehicle: AUDI Q3 2019
Installation position: Right front headlamp position
Brand: AUDI
Model: Q3
Vehicle year: 2019
Lighting configuration: LED lighting
Housing comparison: Compare the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Optical system: Verify the number and position of optical chambers and establish whether daytime lighting is integrated into the main housing.
Electrical interface: Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
Mounting points: Inspect mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Installation guidance: Tighten the fasteners evenly, restore nearby covers only after functional testing, and check bonnet and bumper clearances one final time.
Wholesale packing: Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
Application-specific focus: For the right AUDI Q3 application with led lighting, establish that the beam system and photographed lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Head Light Assembly Overview
This replacement head light is intended for application-specific sourcing rather than universal installation. It is catalogued under OE reference 83A 941 034 for AUDI Q3 2019, with the right position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Verify the number and position of optical chambers and confirm whether daytime lighting is integrated into the main housing.
For the Q3 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Confirm that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
Review mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Connector and Control Hardware
Review every plug and socket with the original unit and verify whether the levelling motor, ballast or LED driver is included or transferred.
Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Transfer only undamaged reusable hardware, confirm the rear caps seal correctly and verify lamp operation before completing surrounding trim.
A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 83A 941 034 |
| Cross-reference numbers | 83A 941 034 |
| Internal item code | AD04001-052 |
| Vehicle brand | AUDI |
| Vehicle model | Q3 |
| Model year | 2019 |
| Installation position | Right front |
| Lighting configuration | LED lighting |
Wholesale Supply and Protective Packing
Carton protection should prevent abrasion on the lens and impact loading on brackets, caps, adjusters or exposed control modules.
When requesting a quotation, supply the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right AUDI Q3 headlamp, the led lighting specification should be assessed together with the 2019 body application. Confirm that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
The right Q3 lighting package should remain the reference during electrical review. Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
When fitting the AUDI Q3 unit at the right front position, preserve even body gaps and the intended beam orientation. Tighten the fasteners evenly, restore surrounding covers only after functional testing, and verify bonnet and bumper clearances one final time.
Frequently Asked Questions
Are bulbs and electronic modules included?
The included components are those external in the product photographs. Verify bulbs, caps, motors, ballasts and LED modules separately.
What distinguishes surrounding lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
What information supports a wholesale quotation?
State the AUDI Q3 application, production year, right side, lighting version, quantity and delivery country.
How can connector compatibility be reviewed?
Review keying, terminal count, latch direction and wire exit, then recognize any required ballast, driver or levelling motor.
Are left and right headlamps interchangeable?
No. This application requires the right side; bracket geometry, optical pattern and wiring position are side-specific.
