81920-02120 Rear Bumper Light for TOYOTA Corolla 2014 Left
Primary OE reference: 81920-02120
Product type: Rear Bumper Light
Applicable vehicle: TOYOTA Corolla 2014
Installation position: Rear bumper / reflector opening
Side / orientation: Left
Brand: TOYOTA
Model: Corolla
Vehicle year: 2014
Shape and clips: Match the lens perimeter and rear support geometry rather than relying on colour or overall appearance alone.
Rear visibility role: Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.
Powered-version check: If the original unit is powered, compare the socket, terminal count, cable exit and locking tab before installation.
Workshop guidance: After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Selection context: Production date and regional bumper specification should be reviewed when several near-identical versions are available.
Post-fit check: For reflector types, confirm correct orientation; for powered types, test the circuit before closing access panels.
Quotation details: Trade enquiries should include the vehicle year, model, bumper position and destination market for accurate picking.
Packing reference: Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.
81920-02120 Rear Bumper Light Overview
This product is listed for TOYOTA Corolla 2014 at the left rear-bumper position. The part occupies a vehicle-specific bumper opening and may function as a reflector, rear fog lamp or auxiliary marker.
A correct vehicle name is only the starting point; market trim and facelift details can change the reflector opening.
Before fitting the left unit, review the reflector texture and lens colour in neutral workshop light to avoid contact with wiring, body edges or hot exhaust components.
Vehicle Fitment and Bumper Interface
Check the bumper recess, outer contour and clip orientation; similar reflectors can use different hidden mounts.
Use the removed component as the physical reference for outer shape, housing projection and clip location.
While the TOYOTA bumper opening is accessible, record the approved side and vehicle application for repeat-order identification to keep the optical face level with the surrounding painted surface.
During comparison of the TOYOTA rear component, confirm that the cable exit, where fitted, clears the bumper reinforcement before any modification is made to the bumper or replacement part.
Reflector, Lens and Electrical Configuration
If the original unit is powered, compare the socket, terminal count, cable exit and locking tab before installation.
Do not polish or modify the lens before fitment confirmation; altered parts are harder to compare accurately.
For a repeat order of the left version, confirm that any connector seal remains square when the housing is fully seated before deciding whether original hardware is suitable for reuse.
On the 2014 Corolla bumper layout, use the opposite-side component only as an alignment reference, not as an interchange part because facelift bumpers can retain the same vehicle name with different apertures.
Installation and Functional Check
After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
After installation, confirm the lens is level with nearby trim and that no retaining tab has backed out.
At the workshop selection stage for Corolla, compare the outer lens edge with the moulded bumper recess so left- and right-hand stock cannot be mixed during consolidation.
At the left rear-bumper position, inspect the lower valance and nearby exhaust trim for adequate operating clearance so the approved product can be picked consistently in a mixed wholesale order.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 81920-02120 |
| Cross-reference numbers | 81920-02120 |
| Internal item code | TY04004-024 |
| Vehicle brand | TOYOTA |
| Vehicle model | Corolla |
| Model year | 2014 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Left |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Confirm the required quantity and packaging method; exposed lens faces and projecting tabs need separate protection.
Projecting tabs should be supported with shaped material instead of carrying the weight of other products.
When reviewing the 2014 vehicle, check the rear housing projection against the space behind the bumper skin so hidden brackets are not loaded or bent during installation.
For the TOYOTA Corolla application, compare the bumper corner radius with the product face from more than one viewing angle to preserve access for a final electrical test where a lamp circuit is present.
Frequently Asked Questions
What if the bumper opening differs?
Stop the installation and compare market version, trim level and hidden mounting geometry before modifying any part.
Should original clips be reused?
Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.
When should photographs be supplied?
Send front, rear and bumper-opening images when the original marking is unclear or several versions share the vehicle name.
How is a passive reflector checked?
Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.
Can the opposite side use the same part?
Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.
Request a Product-Specific Quote
Sharing the removed-part photograph reduces revision time when several bumper styles exist for one model year.
