81591-60131 Rear Bumper Light for TOYOTA Prado 2003-2008 Left
Primary OE reference: 81591-60131
Product type: Rear Bumper Light
Applicable vehicle: TOYOTA Prado 2003-2008
Installation position: Rear bumper / reflector opening
Side / orientation: Left
Brand: TOYOTA
Model: Prado
Vehicle year: 2003-2008
Physical comparison: Match the lens perimeter and rear support geometry rather than relying on colour or overall appearance alone.
Lighting function: Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.
Electrical check: If the original unit is powered, compare the socket, terminal count, cable exit and locking tab before installation.
Installation guidance: After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Selection context: Use the removed component as the physical reference for outer shape, housing projection and clip location.
Post-fit check: Reinstall the liner only after the housing is secure and the cable, if fitted, has adequate clearance.
Wholesale enquiry: Trade enquiries should include the vehicle year, model, bumper position and destination market for accurate picking.
Packing reference: Powered versions benefit from a clean connector cover, while reflector versions need firm support around the rear frame.
81591-60131 Rear Bumper Light Overview
This product is listed for TOYOTA Prado 2003-2008 at the left rear-bumper position. The part occupies a vehicle-specific bumper opening and may function as a reflector, rear fog lamp or auxiliary marker.
Check whether the bumper carries a plain reflector or an illuminated unit before approving the replacement.
When reviewing the 2003-2008 vehicle, compare the outer lens edge with the moulded bumper recess so the visible gap remains even after every retaining point is engaged.
Vehicle-Specific Selection
Check the bumper recess, outer contour and clip orientation; similar reflectors can use different hidden mounts.
Compare both the visible surface and the rear attachment geometry to avoid selecting a cosmetic look-alike.
For the TOYOTA Prado application, inspect the lower valance and nearby exhaust trim for adequate operating clearance so the lens and housing are supported without distortion.
For this Prado body configuration, check the rear housing projection against the space behind the bumper skin so a passive reflector is not confused with an illuminated assembly.
Passive Reflector or Lamp Configuration
If the original unit is powered, compare the socket, terminal count, cable exit and locking tab before installation.
Do not polish or modify the lens before fitment confirmation; altered parts are harder to compare accurately.
Before approving the Prado part for packing, compare the bumper corner radius with the product face from more than one viewing angle to verify that the photographed configuration matches the vehicle in the workshop.
Before fitting the left unit, align each locating tab with the matching slot before applying hand pressure to avoid contact with wiring, body edges or hot exhaust components.
Fitting Guidance and Testing
After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Make sure the component does not touch hot exhaust trim or trap wiring against a sharp body edge.
While the TOYOTA bumper opening is accessible, check whether the original component uses a separate retainer or an integral locking tab to keep the optical face level with the surrounding painted surface.
During comparison of the TOYOTA rear component, verify the fastener direction and the shape of the concealed support frame before any modification is made to the bumper or replacement part.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 81591-60131 |
| Cross-reference numbers | 81591-60131 |
| Internal item code | TY04004-050 |
| Vehicle brand | TOYOTA |
| Vehicle model | Prado |
| Model year | 2003-2008 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Left |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Confirm the required quantity and packaging method; exposed lens faces and projecting tabs need separate protection.
The visible face should remain separated from tape, staples and loose hardware throughout transport.
For a repeat order of the left version, protect the visible surface until the full perimeter gap has been accepted before deciding whether original hardware is suitable for reuse.
On the 2003-2008 Prado bumper layout, review the reflector texture and lens colour in neutral workshop light because facelift bumpers can retain the same vehicle name with different apertures.
Frequently Asked Questions
What if the bumper opening differs?
Stop the installation and compare market version, trim level and hidden mounting geometry before modifying any part.
Should original clips be reused?
Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.
When should photographs be supplied?
Send front, rear and bumper-opening images when the original marking is unclear or several versions share the vehicle name.
How is a passive reflector checked?
Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.
Can the opposite side use the same part?
Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.
Request a Product-Specific Quote
Clear application details allow the sales team to separate reflector and illuminated versions in the offer.
