81220-02160 Fog Light for TOYOTA Corolla 2014-2019 Left
Primary OE reference: 81220-02160
Product type: Fog Light
Applicable vehicle: TOYOTA Corolla 2014-2019
Installation position: Front bumper
Installation side: Left
Brand: TOYOTA
Model: Corolla
Vehicle year: 2014-2019
Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.
Housing and lens check: Check the visible lens profile, housing shape and rear clearance against the original unit.
Mounting comparison: Verify the bracket layout, locating points and fastener direction before installation.
Electrical connection: Check that the harness connector seats fully and uses the same terminal arrangement.
Lighting version: Confirm whether the original lamp uses a replaceable bulb, integrated LED or separate control hardware.
Installation guidance: Test the lighting function before completing bumper reassembly and final alignment.
Quotation information: Include the vehicle application, lamp side, OE number and quantity for accurate order matching.
81220-02160 Fog Light Product Overview
For OE-led sourcing, this page connects the lamp assembly with the stated model, year and mounting side. 81220-02160 is catalogued as a fog light for TOYOTA Corolla 2014-2019, installed at the left front bumper position.
81220-02160 — Vehicle Lighting Role
A front fog lamp adds low-mounted illumination in poor visibility while keeping the beam close to the road surface. For 81220-02160 on the listed Corolla, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU TY04002-030.
For SKU TY04002-030, request carton marking before a repeat export order. Quoting 81220-02160 with the TOYOTA Corolla 2014-2019 and left position helps separate lighting-technology and model-year variants during packing.
TY04002-030 — Part Number and Geometry Review
Start with the full reference 81220-02160; then verify that the listed side matches the vehicle. Item TY04002-030 should not be approved if its housing, bracket layout, left orientation or market specification differs from the removed fog light.
81220-02160 — Optical and Connector Details
Use the 81220-02160 page photographs to review the visible lens pattern and housing finish. For electrical compatibility on SKU TY04002-030, verify bulb specification before transferring reusable parts and confirm the plug reaches its locked position without modification.
TY04002-030 — Workshop Preparation
Before securing 81220-02160, inspect damaged brackets before installing the replacement. After connecting SKU TY04002-030, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.
Automotive Lighting Product Specifications
| Product type | Fog Light |
|---|---|
| Primary OE reference | 81220-02160 |
| Cross-reference numbers | 81220-02160 |
| Internal item code | TY04002-030 |
| Vehicle brand | TOYOTA |
| Vehicle model | Corolla |
| Model year | 2014-2019 |
| Installation position | Front bumper |
| Installation side | Left |
| Lighting version | Match the photographed configuration |
| Product function | Vehicle exterior lighting for the stated bumper position |
Wholesale Supply and Protective Packing
For 81220-02160, the lens face is isolated from carton pressure, while projecting brackets are supported against impact. For SKU TY04002-030, carton selection accounts for housing depth, mounting ears and any exposed aiming hardware.
Frequently Asked Questions
Can model year alone confirm 81220-02160 fitment?
No. For SKU TY04002-030, vehicles built in the same year can use different lighting packages, so use 81220-02160 and the removed lamp geometry as the primary evidence.
Why compare the bumper opening for 81220-02160?
SKU TY04002-030 may resemble another lamp while differing in bracket spacing, housing depth or bezel interface; those differences can prevent correct seating.
How do I confirm 81220-02160 for my vehicle?
Match 81220-02160, the left position, vehicle year, housing depth, mounting ears and electrical connector with the original TOYOTA lamp.
What should be checked on the connector for 81220-02160?
Compare pin count, keying, latch position and cable direction; for LED versions, also verify that the required electronics match the Corolla application.
How should 81220-02160 be installed?
For item TY04002-030, use a no-force trial fit, transfer only suitable original hardware, secure the housing evenly and test function before reinstalling liners or trim.
Request a Product-Specific Quote
Send the complete OE reference 81220-02160, internal number TY04002-030, vehicle details, side, quantity and destination. Yongshang Auto can review the photographed configuration before preparing a trade quotation.
