81150-0R142 Head Light for TOYOTA RAV4 2019 Left
Primary OE reference: 81150-0R142
Cross-reference number 1: 81150-0R142
Product type: Head Light Assembly
Applicable vehicle: TOYOTA RAV4 2019
Installation position: Left front headlamp position
Brand: TOYOTA
Model: RAV4
Vehicle year: 2019
Lighting configuration: standard equipment version, US-market specification
Housing comparison: Verify the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate neighbouring variants.
Optical system: Determine whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated LED light source.
Electrical interface: Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
Mounting points: Verify mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Installation guidance: Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Wholesale packing: For repeat orders, retain the approved product photographs and application record so the same optical and mounting version is chosen.
Application-specific focus: For the left TOYOTA RAV4 application with standard equipment version, us-market specification, look over the lens pattern, internal bezel finish and optical modules so the chosen unit matches the intended lighting package.
Head Light Assembly Overview
This product record supports physical comparison of a front lamp assembly for workshop replacement and wholesale purchasing. It is catalogued under OE reference 81150-0R142 for TOYOTA RAV4 2019, with the left position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Identify whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated LED light source.
For the RAV4 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Verify that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
Inspect mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Connector and Control Hardware
The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Verify the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Use recommended workshop procedures for removal and refitting, then confirm that vibration, panel pressure and cable routing do not stress the housing.
A qualified workshop should inspect surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 81150-0R142 |
| Cross-reference numbers | 81150-0R142 |
| Internal item code | TY04001-167 |
| Vehicle brand | TOYOTA |
| Vehicle model | RAV4 |
| Model year | 2019 |
| Installation position | Left front |
| Lighting configuration | standard equipment version, US-market specification |
Wholesale Supply and Protective Packing
Carton protection should prevent abrasion on the lens and impact loading on brackets, caps, adjusters or exposed control modules.
When requesting a quotation, supply the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left TOYOTA RAV4 headlamp, the standard equipment version, us-market specification specification should be assessed together with the 2019 body application. Lay the replacement beside the removed unit and compare overall depth, edge returns, vent locations and rear-cover clearance.
The left RAV4 lighting package should remain the reference during electrical review. Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
When fitting the TOYOTA RAV4 unit at the left front position, preserve even body gaps and the intended beam orientation. Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.
Frequently Asked Questions
How can connector compatibility be reviewed?
Compare keying, terminal count, latch direction and wire exit, then establish any required ballast, driver or levelling motor.
How should headlamp fitment be confirmed?
For the left RAV4 lamp, compare the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
Why must the rear housing be compared?
A similar lens can conceal a non-matching casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
