81150-0R080 Head Light for TOYOTA RAV4 2016 Left
Primary OE reference: 81150-0R080
Cross-reference number 1: 81150-0R080
Product type: Head Light Assembly
Applicable vehicle: TOYOTA RAV4 2016
Installation position: Left front headlamp position
Brand: TOYOTA
Model: RAV4
Vehicle year: 2016
Lighting configuration: standard equipment version
Housing comparison: Lay the replacement beside the removed unit and evaluate overall depth, edge returns, vent locations and rear-cover clearance.
Optical system: Establish that the beam system and photographed lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Electrical interface: The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Mounting points: Establish that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Installation guidance: Use appropriate workshop procedures for removal and refitting, then verify that vibration, panel pressure and cable routing do not stress the housing.
Wholesale packing: For repeat orders, keep the approved product photographs and application record so the same optical and mounting version is selected.
Application-specific focus: For the left TOYOTA RAV4 application with standard equipment version, recognize whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated led light source.
Head Light Assembly Overview
The listed unit is designed for the stated vehicle position and should be matched to the removed headlamp before installation. It is catalogued under OE reference 81150-0R080 for TOYOTA RAV4 2016, with the left position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Validate that the beam system and visible lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
For the RAV4 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Review the complete lamp body from several angles because a similar lens can conceal a distinct rear casing or bracket offset.
Validate that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Connector and Control Hardware
Validate compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Validate the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Use approved workshop procedures for removal and refitting, then confirm that vibration, panel pressure and cable routing do not stress the housing.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 81150-0R080 |
| Cross-reference numbers | 81150-0R080 |
| Internal item code | TY04001-165 |
| Vehicle brand | TOYOTA |
| Vehicle model | RAV4 |
| Model year | 2016 |
| Installation position | Left front |
| Lighting configuration | standard equipment version |
Wholesale Supply and Protective Packing
Carton protection should prevent abrasion on the lens and impact loading on brackets, caps, adjusters or exposed control modules.
When requesting a quotation, state the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left TOYOTA RAV4 headlamp, the standard equipment version specification should be assessed together with the 2016 body application. Use the original assembly to check the shell profile, upper support shape and clearance around nearby trim before installation.
The left RAV4 lighting package should remain the reference during electrical review. Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
When fitting the TOYOTA RAV4 unit at the left front position, preserve even body gaps and the intended beam orientation. Transfer only undamaged reusable hardware, validate the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Frequently Asked Questions
Why must the rear housing be compared?
A similar lens can conceal a distinct casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
Are bulbs and electronic modules included?
The included components are those external in the product photographs. Inspect bulbs, caps, motors, ballasts and LED modules separately.
What should be checked before installation?
For the RAV4, examine the vehicle supports, compare every fixing point, verify the connector and complete a no-force trial fit.
Can a headlamp be chosen by appearance alone?
No. The left lamp must also agree with the optical system, electrical interface, mounting features and market specification.
Are left and right headlamps interchangeable?
No. This application requires the left side; bracket geometry, optical pattern and wiring position are side-specific.
