81150-02350 Head Light for TOYOTA Corolla 2003 Left
Primary OE reference: 81150-02350
Cross-reference number 1: 81150-02350
Product type: Head Light Assembly
Applicable vehicle: TOYOTA Corolla 2003
Installation position: Left front headlamp position
Brand: TOYOTA
Model: Corolla
Vehicle year: 2003
Lighting configuration: halogen lighting, US-market specification
Housing comparison: Review the complete lamp body from several angles because a similar lens can conceal a different rear casing or bracket offset.
Optical system: Identify whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated LED light source.
Electrical interface: Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
Mounting points: Protect projecting tabs during handling and verify that each locating feature enters the correct body-side slot during the dry fit.
Installation guidance: Use appropriate workshop procedures for removal and refitting, then establish that vibration, panel pressure and cable routing do not stress the housing.
Wholesale packing: For repeat orders, record the approved product photographs and application record so the same optical and mounting version is specified.
Application-specific focus: For the left TOYOTA Corolla application with halogen lighting, us-market specification, evaluate the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
Head Light Assembly Overview
This listing covers a model-specific headlamp assembly whose optical system, brackets and electrical interface must be checked together. It is catalogued under OE reference 81150-02350 for TOYOTA Corolla 2003, with the left position identified in the source record.
The photographed lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Establish whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated LED light source.
For the Corolla application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use alternative internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Verify that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
Protect projecting tabs during handling and verify that each locating feature enters the correct body-side slot during the dry fit.
Connector and Control Hardware
Verify compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Verify the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Use appropriate workshop procedures for removal and refitting, then verify that vibration, panel pressure and cable routing do not stress the housing.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 81150-02350 |
| Cross-reference numbers | 81150-02350 |
| Internal item code | TY04001-068 |
| Vehicle brand | TOYOTA |
| Vehicle model | Corolla |
| Model year | 2003 |
| Installation position | Left front |
| Lighting configuration | halogen lighting, US-market specification |
Wholesale Supply and Protective Packing
Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
When requesting a quotation, supply the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left TOYOTA Corolla headlamp, the halogen lighting, us-market specification specification should be assessed together with the 2003 body application. Lay the replacement beside the removed unit and cross-check overall depth, edge returns, vent locations and rear-cover clearance.
The left Corolla lighting package should remain the reference during electrical review. Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
When fitting the TOYOTA Corolla unit at the left front position, preserve even body gaps and the intended beam orientation. Transfer only undamaged reusable hardware, verify the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Frequently Asked Questions
Are left and right headlamps interchangeable?
No. This application requires the left side; bracket geometry, optical pattern and wiring position are side-specific.
How can connector compatibility be reviewed?
Cross-check keying, terminal count, latch direction and wire exit, then identify any required ballast, driver or levelling motor.
How should headlamp fitment be confirmed?
For the left Corolla lamp, cross-check the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
What information supports a wholesale quotation?
State the TOYOTA Corolla application, production year, left side, lighting version, quantity and delivery country.
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
