81130-AA020 Head Light for TOYOTA Camry 2000 Right
Primary OE reference: 81130-AA020
Cross-reference number 1: 81130-AA020
Product type: Head Light Assembly
Applicable vehicle: TOYOTA Camry 2000
Installation position: Right front headlamp position
Brand: TOYOTA
Model: Camry
Vehicle year: 2000
Lighting configuration: Match the photographed optical configuration
Housing comparison: Use the original assembly to review the shell profile, upper support shape and clearance around adjacent trim before installation.
Optical system: Verify the number and position of optical chambers and verify whether daytime lighting is integrated into the main housing.
Electrical interface: Verify compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Mounting points: A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Installation guidance: Transfer only undamaged reusable hardware, verify the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Wholesale packing: Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
Application-specific focus: For the right TOYOTA Camry application with match the photographed optical configuration, check reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Head Light Assembly Overview
The photographed assembly is supplied for buyers comparing a complete front lighting unit by vehicle application and physical construction. It is catalogued under OE reference 81130-AA020 for TOYOTA Camry 2000, with the right position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Verify the number and position of optical chambers and validate whether daytime lighting is integrated into the main housing.
For the Camry application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Lay the replacement beside the removed unit and evaluate overall depth, edge returns, vent locations and rear-cover clearance.
A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Connector and Control Hardware
Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Validate the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Transfer only undamaged reusable hardware, validate the rear caps seal correctly and verify lamp operation before completing surrounding trim.
A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 81130-AA020 |
| Cross-reference numbers | 81130-AA020 |
| Internal item code | TY04001-010 |
| Vehicle brand | TOYOTA |
| Vehicle model | Camry |
| Model year | 2000 |
| Installation position | Right front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right TOYOTA Camry headlamp, the correspond to the photographed optical configuration specification should be assessed together with the 2000 body application. Use the original assembly to review the shell profile, upper support shape and clearance around surrounding trim before installation.
The right Camry lighting package should remain the reference during electrical review. Correspond to the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
When fitting the TOYOTA Camry unit at the right front position, preserve even body gaps and the intended beam orientation. Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Frequently Asked Questions
Why must the rear housing be compared?
A similar lens can conceal a distinct casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
What should be checked before installation?
For the Camry, look over the vehicle supports, evaluate every fixing point, verify the connector and complete a no-force trial fit.
How can connector compatibility be reviewed?
Evaluate keying, terminal count, latch direction and wire exit, then recognize any required ballast, driver or levelling motor.
How should headlamp fitment be confirmed?
For the right Camry lamp, evaluate the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
