81130-6A200 Head Light for TOYOTA Land Cruiser Prado 2003-2008 Right
Primary OE reference: 81130-6A200
Cross-reference number 1: 81130-6A200
Product type: Head Light Assembly
Applicable vehicle: TOYOTA Land Cruiser Prado 2003-2008
Installation position: Right front headlamp position
Brand: TOYOTA
Model: Land Cruiser Prado
Vehicle year: 2003-2008
Lighting configuration: Match the photographed optical configuration
Housing comparison: Use the original assembly to review the shell profile, upper support shape and clearance around nearby trim before installation.
Optical system: Review the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
Electrical interface: Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Mounting points: Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Installation guidance: Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Wholesale packing: Mixed orders should establish vehicle application and side clearly, with protective packing around the optical face and electrical connections.
Application-specific focus: For the right TOYOTA Land Cruiser Prado application with match the photographed optical configuration, verify the number and position of optical chambers and establish whether daytime lighting is integrated into the main housing.
Head Light Assembly Overview
The photographed assembly is supplied for buyers comparing a complete front lighting unit by vehicle application and physical construction. It is catalogued under OE reference 81130-6A200 for TOYOTA Land Cruiser Prado 2003-2008, with the right position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Cross-check the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.
For the Land Cruiser Prado application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Review the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate neighbouring variants.
Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Connector and Control Hardware
The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Tighten the fasteners evenly, restore nearby covers only after functional testing, and check bonnet and bumper clearances one final time.
A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 81130-6A200 |
| Cross-reference numbers | 81130-6A200 |
| Internal item code | TY04001-264 |
| Vehicle brand | TOYOTA |
| Vehicle model | Land Cruiser Prado |
| Model year | 2003-2008 |
| Installation position | Right front |
| Lighting configuration | Match the photographed optical configuration |
Wholesale Supply and Protective Packing
For repeat orders, record the approved product photographs and application record so the same optical and mounting version is specified.
When requesting a quotation, state the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right TOYOTA Land Cruiser Prado headlamp, the agree with the photographed optical configuration specification should be assessed together with the 2003-2008 body application. Cross-check the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
The right Land Cruiser Prado lighting package should remain the reference during electrical review. Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
When fitting the TOYOTA Land Cruiser Prado unit at the right front position, preserve even body gaps and the intended beam orientation. Use appropriate workshop procedures for removal and refitting, then verify that vibration, panel pressure and cable routing do not stress the housing.
Frequently Asked Questions
What information supports a wholesale quotation?
State the TOYOTA Land Cruiser Prado application, production year, right side, lighting version, quantity and delivery country.
Are left and right headlamps interchangeable?
No. This application requires the right side; bracket geometry, optical pattern and wiring position are side-specific.
Can a headlamp be chosen by appearance alone?
No. The right lamp must also agree with the optical system, electrical interface, mounting features and market specification.
What distinguishes nearby lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
How should headlamp fitment be confirmed?
For the right Land Cruiser Prado lamp, cross-check the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
