81110-0R360 Head Light for TOYOTA RAV4 2023 Right
Primary OE reference: 81110-0R360
Cross-reference number 1: 81110-0R360
Product type: Head Light Assembly
Applicable vehicle: TOYOTA RAV4 2023
Installation position: Right front headlamp position
Brand: TOYOTA
Model: RAV4
Vehicle year: 2023
Lighting configuration: version with integrated daytime running light, premium equipment version, US-market specification
Housing comparison: Verify the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate surrounding variants.
Optical system: Look over the lens pattern, internal bezel finish and optical modules so the requested unit matches the intended lighting package.
Electrical interface: Cross-check every plug and socket with the original unit and verify whether the levelling motor, ballast or LED driver is included or transferred.
Mounting points: Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Installation guidance: Use approved workshop procedures for removal and refitting, then verify that vibration, panel pressure and cable routing do not stress the housing.
Wholesale packing: For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
Application-specific focus: For the right TOYOTA RAV4 application with version with integrated daytime running light, premium equipment version, us-market specification, look over the lens pattern, internal bezel finish and optical modules so the requested unit matches the intended lighting package.
Head Light Assembly Overview
This product record supports physical comparison of a front lamp assembly for workshop replacement and wholesale purchasing. It is catalogued under OE reference 81110-0R360 for TOYOTA RAV4 2023, with the right position identified in the source record.
The photographed lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Examine the lens pattern, internal bezel finish and optical modules so the chosen unit matches the intended lighting package.
For the RAV4 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Use the original assembly to review the shell profile, upper support shape and clearance around nearby trim before installation.
Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Connector and Control Hardware
Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 81110-0R360 |
| Cross-reference numbers | 81110-0R360 |
| Internal item code | TY04001-180 |
| Vehicle brand | TOYOTA |
| Vehicle model | RAV4 |
| Model year | 2023 |
| Installation position | Right front |
| Lighting configuration | version with integrated daytime running light, premium equipment version, US-market specification |
Wholesale Supply and Protective Packing
Left and right units should be labelled separately, and internal supports should keep the lamp from moving inside the export carton.
When requesting a quotation, supply the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right TOYOTA RAV4 headlamp, the version with integrated daytime running light, premium equipment version, us-market specification specification should be assessed together with the 2023 body application. Review the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate nearby variants.
The right RAV4 lighting package should remain the reference during electrical review. Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
When fitting the TOYOTA RAV4 unit at the right front position, preserve even body gaps and the intended beam orientation. Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Frequently Asked Questions
What distinguishes adjacent lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
How should headlamp fitment be confirmed?
For the right RAV4 lamp, review the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
Are bulbs and electronic modules included?
The included components are those photographed in the product photographs. Review bulbs, caps, motors, ballasts and LED modules separately.
