81110-0R350 Head Light for TOYOTA RAV4 2023 Right
Primary OE reference: 81110-0R350
Cross-reference number 1: 81110-0R350
Product type: Head Light Assembly
Applicable vehicle: TOYOTA RAV4 2023
Installation position: Right front headlamp position
Brand: TOYOTA
Model: RAV4
Vehicle year: 2023
Lighting configuration: premium equipment version
Housing comparison: Validate that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
Optical system: Verify the number and position of optical chambers and validate whether daytime lighting is integrated into the main housing.
Electrical interface: Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
Mounting points: Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Installation guidance: After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Wholesale packing: For repeat orders, retain the approved product photographs and application record so the same optical and mounting version is requested.
Application-specific focus: For the right TOYOTA RAV4 application with premium equipment version, validate that the beam system and photographed lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Head Light Assembly Overview
The headlamp shown should be requested as a complete vehicle-specific assembly, with side and lighting version confirmed before ordering. It is catalogued under OE reference 81110-0R350 for TOYOTA RAV4 2023, with the right position identified in the source record.
The observable lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Verify the number and position of optical chambers and establish whether daytime lighting is integrated into the main housing.
For the RAV4 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Establish that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Connector and Control Hardware
Match the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Establish the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Use appropriate workshop procedures for removal and refitting, then establish that vibration, panel pressure and cable routing do not stress the housing.
A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 81110-0R350 |
| Cross-reference numbers | 81110-0R350 |
| Internal item code | TY04001-176 |
| Vehicle brand | TOYOTA |
| Vehicle model | RAV4 |
| Model year | 2023 |
| Installation position | Right front |
| Lighting configuration | premium equipment version |
Wholesale Supply and Protective Packing
Left and right units should be labelled separately, and internal supports should keep the lamp from moving inside the export carton.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right TOYOTA RAV4 headlamp, the premium equipment version specification should be assessed together with the 2023 body application. Establish that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
The right RAV4 lighting package should remain the reference during electrical review. Match the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
When fitting the TOYOTA RAV4 unit at the right front position, preserve even body gaps and the intended beam orientation. Tighten the fasteners evenly, restore adjacent covers only after functional testing, and inspect bonnet and bumper clearances one final time.
Frequently Asked Questions
Why must the rear housing be compared?
A similar lens can conceal a non-matching casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
What distinguishes adjacent lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
Can a headlamp be chosen by appearance alone?
No. The right lamp must also match the optical system, electrical interface, mounting features and market specification.
What information supports a wholesale quotation?
State the TOYOTA RAV4 application, production year, right side, lighting version, quantity and delivery country.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
