81110-0R142 Head Light for TOYOTA RAV4 2019 Right
Primary OE reference: 81110-0R142
Cross-reference number 1: 81110-0R142
Product type: Head Light Assembly
Applicable vehicle: TOYOTA RAV4 2019
Installation position: Right front headlamp position
Brand: TOYOTA
Model: RAV4
Vehicle year: 2019
Lighting configuration: standard equipment version, US-market specification
Housing comparison: Establish that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
Optical system: Establish that the beam system and observable lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Electrical interface: Correspond to the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.
Mounting points: Establish that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Installation guidance: Transfer only undamaged reusable hardware, establish the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Wholesale packing: For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
Application-specific focus: For the right TOYOTA RAV4 application with standard equipment version, us-market specification, recognize whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated led light source.
Head Light Assembly Overview
The headlamp shown should be selected as a complete vehicle-specific assembly, with side and lighting version confirmed before ordering. It is catalogued under OE reference 81110-0R142 for TOYOTA RAV4 2019, with the right position identified in the source record.
The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Validate that the beam system and external lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
For the RAV4 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use different internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Cross-check the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
Validate that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.
Connector and Control Hardware
Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Validate the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 81110-0R142 |
| Cross-reference numbers | 81110-0R142 |
| Internal item code | TY04001-168 |
| Vehicle brand | TOYOTA |
| Vehicle model | RAV4 |
| Model year | 2019 |
| Installation position | Right front |
| Lighting configuration | standard equipment version, US-market specification |
Wholesale Supply and Protective Packing
Mixed orders should identify vehicle application and side clearly, with protective packing around the optical face and electrical connections.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right TOYOTA RAV4 headlamp, the standard equipment version, us-market specification specification should be assessed together with the 2019 body application. Validate that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
The right RAV4 lighting package should remain the reference during electrical review. The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
When fitting the TOYOTA RAV4 unit at the right front position, preserve even body gaps and the intended beam orientation. Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Frequently Asked Questions
Why must the rear housing be compared?
A similar lens can conceal a different casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
Are bulbs and electronic modules included?
The included components are those external in the product photographs. Inspect bulbs, caps, motors, ballasts and LED modules separately.
What information supports a wholesale quotation?
State the TOYOTA RAV4 application, production year, right side, lighting version, quantity and delivery country.
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
What should be checked before installation?
For the RAV4, look over the vehicle supports, review every fixing point, verify the connector and complete a no-force trial fit.
