81110-0R080 Head Light for TOYOTA RAV4 2016 Right
Primary OE reference: 81110-0R080
Cross-reference number 1: 81110-0R080
Product type: Head Light Assembly
Applicable vehicle: TOYOTA RAV4 2016
Installation position: Right front headlamp position
Brand: TOYOTA
Model: RAV4
Vehicle year: 2016
Lighting configuration: standard equipment version
Housing comparison: Verify that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
Optical system: Verify that the beam system and photographed lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Electrical interface: Verify compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Mounting points: Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Installation guidance: Use recommended workshop procedures for removal and refitting, then establish that vibration, panel pressure and cable routing do not stress the housing.
Wholesale packing: Left and right units should be labelled separately, and internal supports should keep the lamp from moving inside the export carton.
Application-specific focus: For the right TOYOTA RAV4 application with standard equipment version, verify that the beam system and photographed lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Head Light Assembly Overview
The headlamp shown should be selected as a complete vehicle-specific assembly, with side and lighting version confirmed before ordering. It is catalogued under OE reference 81110-0R080 for TOYOTA RAV4 2016, with the right position identified in the source record.
The visible lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Establish that the beam system and external lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
For the RAV4 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Lay the replacement beside the removed unit and compare overall depth, edge returns, vent locations and rear-cover clearance.
Start all fasteners loosely during the trial fit and make sure the housing rests against its supports without bending a bracket.
Connector and Control Hardware
Establish compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Establish the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.
A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 81110-0R080 |
| Cross-reference numbers | 81110-0R080 |
| Internal item code | TY04001-166 |
| Vehicle brand | TOYOTA |
| Vehicle model | RAV4 |
| Model year | 2016 |
| Installation position | Right front |
| Lighting configuration | standard equipment version |
Wholesale Supply and Protective Packing
For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.
When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right TOYOTA RAV4 headlamp, the standard equipment version specification should be assessed together with the 2016 body application. Compare the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.
The right RAV4 lighting package should remain the reference during electrical review. Establish compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
When fitting the TOYOTA RAV4 unit at the right front position, preserve even body gaps and the intended beam orientation. Tighten the fasteners evenly, restore adjacent covers only after functional testing, and inspect bonnet and bumper clearances one final time.
Frequently Asked Questions
What information supports a wholesale quotation?
State the TOYOTA RAV4 application, production year, right side, lighting version, quantity and delivery country.
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
When is professional beam aiming required?
Beam alignment should be checked after the unit is secured and every lighting function has been tested.
Are left and right headlamps interchangeable?
No. This application requires the right side; bracket geometry, optical pattern and wiring position are side-specific.
What distinguishes adjacent lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
