81110-02R80 Head Light for TOYOTA Corolla 2017 Right
Primary OE reference: 81110-02R80
Cross-reference number 1: 81110-02R80
Product type: Head Light Assembly
Applicable vehicle: TOYOTA Corolla 2017
Installation position: Right front headlamp position
Brand: TOYOTA
Model: Corolla
Vehicle year: 2017
Lighting configuration: Middle East specification
Housing comparison: Use the original assembly to check the shell profile, upper support shape and clearance around adjacent trim before installation.
Optical system: Check reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Electrical interface: Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
Mounting points: A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Installation guidance: Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Wholesale packing: Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.
Application-specific focus: For the right TOYOTA Corolla application with middle east specification, check reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Head Light Assembly Overview
The photographed assembly is supplied for buyers comparing a complete front lighting unit by vehicle application and physical construction. It is catalogued under OE reference 81110-02R80 for TOYOTA Corolla 2017, with the right position identified in the source record.
The visible lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Review reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
For the Corolla application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use alternative internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Verify that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Connector and Control Hardware
The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Verify the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Transfer only undamaged reusable hardware, verify the rear caps seal correctly and verify lamp operation before completing surrounding trim.
A qualified workshop should inspect surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 81110-02R80 |
| Cross-reference numbers | 81110-02R80 |
| Internal item code | TY04001-132 |
| Vehicle brand | TOYOTA |
| Vehicle model | Corolla |
| Model year | 2017 |
| Installation position | Right front |
| Lighting configuration | Middle East specification |
Wholesale Supply and Protective Packing
Left and right units should be labelled separately, and internal supports should keep the lamp from moving inside the export carton.
When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right TOYOTA Corolla headlamp, the middle east specification specification should be assessed together with the 2017 body application. Review the complete lamp body from several angles because a similar lens can conceal a alternative rear casing or bracket offset.
The right Corolla lighting package should remain the reference during electrical review. Review every plug and socket with the original unit and verify whether the levelling motor, ballast or LED driver is included or transferred.
When fitting the TOYOTA Corolla unit at the right front position, preserve even body gaps and the intended beam orientation. Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.
Frequently Asked Questions
What should be checked before installation?
For the Corolla, inspect the vehicle supports, compare every fixing point, verify the connector and complete a no-force trial fit.
Are left and right headlamps interchangeable?
No. This application requires the right side; bracket geometry, optical pattern and wiring position are side-specific.
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
Can a headlamp be chosen by appearance alone?
No. The right lamp must also align with the optical system, electrical interface, mounting features and market specification.
Are bulbs and electronic modules included?
The included components are those visible in the product photographs. Verify bulbs, caps, motors, ballasts and LED modules separately.
