8104103P3010 Blower Motor for JAC T6
Primary OE reference: 8104103P3010
Cross-reference 1: 8104103P306AA
Product type: Automotive HVAC Blower Motor
Applicable vehicle: JAC T6
Brand: JAC
Model: T6
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
8104103P3010 Automotive Blower Motor Overview
This product entry documents the 8104103P3010 blower unit with practical identification and 8104103P3010 installation checkpoints.
For catalogue item 6213-008, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 8104103P3010 blower important at idle and in traffic. Use 6213-008 when comparing this 8104103P3010 airflow configuration.
OE Reference and Application
The primary catalogue number is 8104103P3010. The recorded application is JAC T6. For 6213-008, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6213-008 with the approved OE reference.
HVAC Interface and 8104103P3010 installation
During work on 6213-008, After 8104103P3010 installation, operate low through high speed and confirm 8104103P3010 airflow reaches the selected vents without abnormal vibration. Recheck 6213-008 before the lower trim is closed.
For item 6213-008, confirm that the 8104103P3010 centrifugal wheel clears its housing and that the 6213-008 connector lock engages without force. After seating 6213-008, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6213-008.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 8104103P3010 |
| Cross-reference numbers | 8104103P306AA |
| Vehicle brand | JAC |
| Vehicle model | T6 |
| Model year | Confirm by OE reference |
| 8104103P3010 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6213-008, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6213-008 record remains the picking reference.
For trade item 6213-008, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6213-008 on the packing instruction.
Frequently Asked Questions
How should item 6213-008 and blower number 8104103P3010 be verified?
Match 6213-008 to the complete 8104103P3010 marking, then compare the 6213-008 plug, terminal count, mounting flange and wheel dimensions with the removed JAC unit.
Can 6213-008 have more than one vehicle-side blower configuration?
Yes. JAC production changes can affect 6213-008; confirm steering position, climate-control specification and the original 6213-008 geometry before approval.
What circuit checks are useful when 6213-008 does not operate?
For 6213-008, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6213-008 motor again.
Which details should accompany a wholesale request for 6213-008?
Provide item 6213-008, OE 8104103P3010, the stated application, quantity and destination; add 6213-008 carton or private-label requirements separately.
How can noise be avoided after fitting 6213-008?
Clear debris from the air inlet, check that the 6213-008 wheel turns freely, seat the 6213-008 flange evenly and keep wiring away from the impeller.
Request a quote for 6213-008: Send 8104103P3010, the 6213-008 application and required quantity for a fitment and supply review.
